SnapmakerCuraPlugin
SnapmakerCuraPlugin copied to clipboard
Snapmaker
Snapmaker plugin for Cura 5
The build plate temperature is 80 when it has been set to 105 in Cura.
This adds the ability to add a background print bed image to all the plugins. I have included a quick image I have created for the Artisan (the source is...
Currently when switching nozzles for dual extruder (Artisan) it starts printing before new nozzle gets to temp.
I 'm running cura 5.6 and added the snapmaker plugin. I've selected the printer accordning to the description as a "Add a non-networked printer". When I slice now I do...
I'm no expert, so not sure if this is a problem with the plugin, or with Cura itself, but when sending a job directly via wifi the first layer temps...
So I'm guessing there's no support for the first Snapmaker right? I wanted to use Cura but without settings it's impossible.
The Extruder change (left==>right or right==>left) always happens in the place where one layer is finished. this leads to material dripping out of the extruder onto the model. LUBAN does...
Just recently bought a Snapmaker J1s and downloaded the J1s plugin for cura, as per the instructions. However, when trying to send to the printer/disk/export, the error " could not...
In past Cura releases, I noticed the bed's edges in the profile would be off by a few mm, 1cm at most, but in the latest update the discrepancy seems...
[Machine width is set to 324](https://github.com/Snapmaker/SnapmakerJ1CuraPlugin/blob/main/resources/snapmaker_j1_profiles/definitions/snapmaker_j1.def.json#L26) The left extruder cannot reach X=324. Furthermore, the right extruder cannot reach X=0 The advertised build volume width of 300mm is not possible for...
