Snapmaker2-Controller icon indicating copy to clipboard operation
Snapmaker2-Controller copied to clipboard
verified publisher icon Snapmaker

Crash in fabscreen following run boundary

Open halr9000 opened this issue 5 years ago • 5 comments

Steps to reproduce

  1. Uploaded 3 .nc files over wifi from Luban
  2. On controller, disconnected from wifi
  3. Select file, press ready
  4. Set x and y origins
  5. Press “run boundary”

At this point the controller crashed with the error “fabscreen has stopped”. After recovering, the files I had uploaded appeared to be missing. I cycled power and found that the files were still there.

ref forum thread: https://forum.snapmaker.com/t/fabscreen-has-stopped-error-after-attempting-to-run-boundary-in-cnc-mode/13440

Note that the job mills ok. Only boundary run is crashing. Gcode has been uploaded to forum.

halr9000 avatar Dec 27 '20 19:12 halr9000

@halr9000 We've reproduced this issue and we will fix it in the next version ASAP. Thanks for the report.

voidrin avatar Jan 06 '21 10:01 voidrin

Hi @halr9000 , sorry for replying late. We've release v1.11.4 firmware update (including HMI) on our forum and official website. We fix the Run Boundary crash issue in this release. Please try the latest release.

voidrin avatar Feb 03 '21 10:02 voidrin

I'm running into this problem using Fusion 360, Luban 3.15.1 and Snapmaker 2.0 A350 V1.13.1

ifish86 avatar Aug 02 '21 16:08 ifish86

same here, with a fresh reinstall of latest version. It fail on a simple 2D contour from fusion 360

npoirey avatar Sep 27 '21 19:09 npoirey

I just had this same error happen with fusion360, Luban 4.8.2, Snapmaker 2.0 A350 V1.16.7.

Is there an actual fix to this @voidrin ?

connwork avatar Sep 01 '23 22:09 connwork