Luban Feature Request: set if mill should follow the line on the outside or inside in cnc

Feature Request: set if mill should follow the line on the outside or inside in cnc

Open EHoglid opened this issue 3 years ago • 6 comments

When importing a 2 dimension DXF file it should be great if you can decide if the mill should follow the lines on the outside or inside for each line.

For example. If you want to make a hole in a wooden plate, you want to follow the line on the inside, removing the radius of the CNC bits. If you want to carve out a plate, you want to follow the line on the outside.

Apr 18 '21 13:04 EHoglid

It's on the way. At this time, the outline for svg is correct.But for dxf, it has some problems.

Apr 21 '21 10:04 jane-rose

IMG_20210421_125858

Great, because in this case it is important for me that the mill followed the line on the inner side, keeping the dimension correct of the hole, not the cutout circle.

Erik

Apr 21 '21 11:04 EHoglid

Imo this is an essential function. At the moment the option "Outline" is plain wrong for both DXF and SVGs, if I'm not mistaken. It does a double cut, which totally unnecessary. grafik grafik I've tried milling and it indeed traces the lines shown.