Update aeotec-wallmote.groovy

[sky-nie]

We test the device "Minoston Remote Control" and find that the deviceJoinName is not take effect. It is always showed as "Aeotec Wallmote", the DTH name. Another brand is showed, which is not acceptable. So I have to create another DTH and start a new PR(https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/78439). I will cancel the PRs if your guys can fix it soon. Thanks!

[KKlimczukS]

@sky-nie that's because You requested to add this device last year:

https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/74138/files and then updated it: https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/76125/files

cc: @k-morawski

[sky-nie]

@sky-nie that's because You requested to add this device last year:

https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/74138/files and then updated it: https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/76125/files

cc: @k-morawski I don't understand your mean- Is this problem caused by the update (the "prod" field can not be used?)?

[KKlimczukS]

@sky-nie that's because You requested to add this device last year: https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/74138/files and then updated it: https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/76125/files cc: @k-morawski I don't understand your mean- Is this problem caused by the update (the "prod" field can not be used?)?

@sky-nie It's not a problem. This device was integrated in that particular DTH last year, that's why it includes that way and it's supported by that DTH: Aeotec Wallmote.

[sky-nie]

@sky-nie that's because You requested to add this device last year: https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/74138/files and then updated it: https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/76125/files cc: @k-morawski I don't understand your mean- Is this problem caused by the update (the "prod" field can not be used?)?

@sky-nie It's not a problem. This device was integrated in that particular DTH last year, that's why it includes that way and it's supported by that DTH: Aeotec Wallmote. @KKlimczukS: I see, but we find that the deviceJoinName is not take effect in the recently test, it is replaced with the DTH name——it is an unacceptable question. I'm sure that when I first updated the DTH of Aeotec Wallmote, there is not the problem.

[KKlimczukS]

@KKlimczukS: I see, but we find that the deviceJoinName is not take effect in the recently test, it is replaced with the DTH name——it is an unacceptable question. I'm sure that when I first updated the DTH of Aeotec Wallmote, there is not the problem.

@sky-nie Can You share any screen of this issue ? (from ST app UI and graphapi)

[k-morawski]

Dear @sky-nie, could you please reply to @KKlimczukS request. Please let us know if you have any questions. Thanks

[sky-nie]

@KKlimczukS: I see, but we find that the deviceJoinName is not take effect in the recently test, it is replaced with the DTH name——it is an unacceptable question. I'm sure that when I first updated the DTH of Aeotec Wallmote, there is not the problem.

@sky-nie Can You share any screen of this issue ? (from ST app UI and graphapi)

Here is the device info:

You can find that the "Name" and "Label" should be "Minoston Remote Control Switch" by the DTH.

And on the phone(from ST app UI and graphapi):

The default deviceName is not "Minoston Remote Control Switch".

@KKlimczukS

[KKlimczukS]

@sky-nie Could You double-check following things:

• remove the device in the ST app
• enter graphapi and make sure to unpublish all your DTHs that contain Your device's fingerprint (or put that fingerprint in comment and publish DTH) fingerprint mfr: "0312", prod: "0924", model: "D001", deviceJoinName: "Minoston Remote Control", mnmn: "SmartThings", vid: "generic-4-button" //Minoston Wallmote
• include the device again (device should be backed by production DTH and this moment)
• check device label again and put screens here

[sky-nie]

@sky-nie Could You double-check following things:

• remove the device in the ST app
• enter graphapi and make sure to unpublish all your DTHs that contain Your device's fingerprint (or put that fingerprint in comment and publish DTH) fingerprint mfr: "0312", prod: "0924", model: "D001", deviceJoinName: "Minoston Remote Control", mnmn: "SmartThings", vid: "generic-4-button" //Minoston Wallmote
• include the device again (device should be backed by production DTH and this moment)
• check device label again and put screens here

I have delete the device from ST app:

Also there is no normal device listed in the IDE:

And there is only the DTH in the IDE And I have put that fingerprint in comment:

I have published it for myself（Not committed to the repository, so it's highlighted），Now we can see the result:

The list screenshots:

@KKlimczukS

[KKlimczukS]

@sky-nie Please, could You repeat those steps and provide us the timeframe and:

• location id
• device id

(You can find both of them in the graph api)

[sky-nie]

Please, could You repeat those steps and provide us the timeframe and

@sky-nie Please, could You repeat those steps and provide us the timeframe and:

• location id
• device id

(You can find both of them in the graph api)

I'm confused by your needs and I don't get it - Can you provide your email or Samsung account ? I can send an invaitation to you in the test location.

[KKlimczukS]

Please, could You repeat those steps and provide us the timeframe and

@sky-nie Please, could You repeat those steps and provide us the timeframe and:

• location id
• device id

(You can find both of them in the graph api)

I'm confused by your needs and I don't get it - Can you provide your email or Samsung account ? I can send an invaitation to you in the test location.

@sky-nie When You log in the https://graph.api.smartthings.com You will find all the information that I asked for.

[sky-nie]

Please, could You repeat those steps and provide us the timeframe and

@sky-nie Please, could You repeat those steps and provide us the timeframe and:

• location id
• device id

(You can find both of them in the graph api)

I'm confused by your needs and I don't get it - Can you provide your email or Samsung account ? I can send an invaitation to you in the test location.

@sky-nie When You log in the https://graph.api.smartthings.com You will find all the information that I asked for.

Oh, I find that it is defferent with the IDE I used:

And the screenshot you refered url:

Am I using it wrong?

[KKlimczukS]

@sky-nie

1. After You re-onboard Your device and note the time-frame, please:
2. enter graphapi, go to locations and select that location that Your device is included to. The location id should be in the URL(... /location/show/
3. then go to devices and select device You added. Again, device id should be in the URL (.../device/show/

[sky-nie]

For the device "Aeotec Wallmote" showed as above: https://graph-na04-useast2.api.smartthings.com/device/show/6b3e64a7-a358-46d9-a52b-28581a7f0221

The location "nie": https://graph-na04-useast2.api.smartthings.com/location/show/6832deb1-2d9f-4508-8a99-d7715987ad22

[KKlimczukS]

@sky-nie Any timeframe ? (when did You onboard that device ?)

[sky-nie]

@sky-nie Any timeframe ? (when did You onboard that device ?)

I delete the device ,and repeat to onboard that device: The location "nie" keeep as "6832deb1-2d9f-4508-8a99-d7715987ad22". And the device id keep a static string every time---not same with last time.

[KKlimczukS]

@sky-nie ok, when exactly did it happen ? (YYYY-MM-DD HH:MM:SS)

[sky-nie]

@sky-nie ok, when exactly did it happen ? (YYYY-MM-DD HH:MM:SS) For this product, the problem is static exist.

[KKlimczukS]

@sky-nie Investigation is ongoing. Please, could You re-join the device again and post a current device id ? cc: @k-morawski

[KKlimczukS]

@sky-nie Investigation is ongoing. Please, could You re-join the device again and post a current device id ? cc: @k-morawski

@sky-nie cc: @k-morawski

[KKlimczukS]

Closed due to long inactivity.