Matter Lock Aqara U200 Issue

[philpeeps]

https://github.com/SmartThingsCommunity/SmartThingsEdgeDrivers/blob/main/drivers/SmartThings/matter-lock/fingerprints.yml

matterManufacturer: #Aqara

• id: "4447/10242" deviceLabel: Aqara Smart Lock U200 vendorId: 0x115F productId: 0x2802 deviceProfileName: lock-lockalarm-nobattery

This fingerprint only provides for limited functionality of the device with no user codes to be assigned in SLGA. Please adjust as required.

[philpeeps]

My understanding is this lock should be set to deviceProfileName: base-lock to utilize its capabilities and prior to adding this device specific fingerprint recently for U200 and U300, other owners of this lock could program codes in SLGA and view battery status.

[lelandblue]

Hello @HunsupJung Please review this reported issue from the Customer regarding the current integration with the U200.

[HunsupJung]

We are currently preparing to provide an improved door lock experience. So we set it to a profile without lock-codes. it will soon be available to users.

[philpeeps]

Thanks for the update. Is there an approximate timeline so I know when to check back and start developing routings integrating the lock with advanced features?

[lelandblue]

Please feel welcome to follow our upcoming event, https://www.samsungdeveloperconference.com/. We are not sharing timelines at this time. I may reach out again to you in the near future with more information.

[philpeeps]

I saw the announcement of adding support for NFC and Samsung wallet from the SDC. All information I see says 2025 for timing. Please confirm I don't have to wait until 2025 to get the functionality of this lock with SLGA that was previously available for users when it would apply the base-lock profile and that already have the base-lock profile since they added it prior to this change.

[philpeeps]

Still no ability to use SLGA for this lock as SLGA does not see it as a lock, despite it clearly being a lock. Any update on when full functionality and compatibility with ST will be provided with this lock?

[HunsupJung]

The SLGA will be sunset at the end of this year. New door lock devices to be added in the future, including Aqara products, do not support SLGA. Instead, you can use Manage users in the detail plugin view to manage your user's credentials. FYI, Aqara Smart Lock U200 uses lock-user-pin profile.

[philpeeps]

Thanks for the info. Will the SLGA sunsetting be announced to the ST community soon?

Will ST support recognizing Aqara's fingerprint sensor unlocking for users? I see I can set routines based on which member unlocked the door, but it only seems to support PIN codes for users entered directly in ST, not fingerprint users registered via the Aqara app.

[philpeeps]

Will SLGA be sunset for current and future zwave and zigbee locks as well?