Skorpionm

I think that there can’t be a simple sequence of signals, at different frequencies, it’s still some kind of protocol, I still need to hold this key fob in my...

> https://fccid.io/KR5V1X/Test-Report/Occupied-Bandwidth-Plot-1913633 > > это ФСК this shows that Deviation ~ 47.7k, more accurately you need to look at SDR. Write wav to SDRSharp, there will be a lot less...

the transmission frequency +- 30k indirectly confirms that this is FSK. you can also try recording RAW on "FM476" and attach it here, I'll look at it

look carefully that I asked you to record the frequency range of the Sdrsharp program in order to accurately see the signal parameters. and not recording at 1 frequency, and...

 you have a 2-frequency remote control, with FSK modulation, it looks like the deviation is 27.7 kHz, the transmission goes alternately on 1 then on 2 frequencies

 deceived 30-32 kHz although maybe 4FSK

you just have a 2-frequency remote that transmits in turn

signals are recorded incorrectly, and very short, do as it is written here https://forum.flipperzero.one/t/my-remote-isnt-supported-how-to-add-new-sub-ghz-protocol-in-flipper-zero/2033

the frequency analyzer works only with devices that you bring close to the flipper. and does not catch devices more than 15 centimeters away from it. this was done on...

something is wrong with you even with an accuracy of 5% it is - + 5.75us I doubt very much that it's + -1us