Manuel Camargo

Anyway, I've been thinking that you could be running your scripts, because you found the /proc/ executable mechanism, straight from the beginning, right? So despite I could find the firmware...

> it would be easier to cut the pin and solder it back - How can you cut the CLK pin? - Which were your schematics from the cam board...

Ok I think I have the firmware, which was the processor you used for GHidra? 

This is what I've found: ``` DECIMAL HEXADECIMAL DESCRIPTION -------------------------------------------------------------------------------- 2036141 0x1F11AD Certificate in DER format (x509 v3), header length: 4, sequence length: 1284 3327273 0x32C529 Certificate in DER format...

From what I see there is another OS used for the same chipset we have in our cams (HI3518), called LiteOS https://gitee.com/LiteOS/LiteOS So we are talking about a Unix based...

I've seen that [you mentioned it before](https://github.com/guino/BazzDoorbell/issues/35#issuecomment-901434026) So here is a dead end for this cam :( I'll have to connect to the UART since I've seen that some people...

Interesting that OpenIPC I've never heard about But the documentation of that project is completely absent + all Telegram groups are 100% Russian. A very difficult access barrier :) But...

I've talked with them, and this is a super challenge... Basically, first I should be flashing that firmware, and soldering (and finding) if there is a USB connection for the...

I've contacted all the white labels sites to see if someone could provide me such firmware but no luck Lucky enough, today @jonwedell has replayed in another issue in the...

Looks promising ``` # tlp-stat -b --- TLP 1.5.0 -------------------------------------------- +++ Battery Care Plugin: APPLESMC Supported features: charge thresholds Driver usage: * natacpi (APPLESMC_MOD) = active (charge thresholds) +++ Battery...