SimonMerrett

I turned my debounce to 10, from 5 as per original repo, and I am finding far fewer repeated typped keys (although some slip through as you can see!). I...

> what version of the nRF5 SDK are you building against ? Not a silly question. I had to go and check though! Yes, version 11.0.0 release date: Week 10...

**EDIT** Ignore my nonsense about `nrf_gzll_set_timeslots_per_channel_when_device_out_of_sync()` below - it clearly has no effect on the Host! ___ @karosc, thanks for persisting with this. I'm sure we will work it out!...

> I am not understanding why we need to multiply by 6 twice We do not. I made a big error and have placed an EDIT at the top of...

> but isn't this where we started Yep, probably! Although going "back" to those settings is a huge improvement over what I had been putting up with for a few...

> It is very weird that my issue only occurs on the left half and only after a long idle period or after a pc restart You could try swapping...

I think there is some kind of debug through the qmk app/console but I haven't looked for a while.

I am using 2x AA for each side, just checked and my right side is at 2.54V. AAs should not have any issue with delivering sufficient current for the NRF51...

I have been seeing progressively worse rf link over the last week or so. I decided to recharge (top up) my 2x AA NiMH rechargeable cells per keyboard half. Meanwhile,...

> What about using a 3.3V regulator on the keyboard like one of this: @Slavfot the link is broken but the mcp1700 is a linear low dropout (LDO) buck converter....