i3PlusPlus
i3PlusPlus copied to clipboard
Silverquark
This is a modified version of the Marlin 1.1.4 firmware for the WANHAO Duplicator i3 Plus 3d printer.
I flashed everything (screen and motherboard as per instructions and by far and large every single thing works well, apart from that pressing the Print button produces on response, other...
This PR gets the version of Marlin that this is running off of up to date with the latest stable release of Marlin 1.1.9 and incorporates some changes to add...
Beta 3 - seems to have a problem with under-extrusion on prints, but seemingly at random. Tried about 6 or 7 prints, and only 2 succeeded. I spent a day...
We get a minute or two in to a print and the printer just stops and seems to try to reboot. Any ideas?
Whenever I want to move on any of the axis they have to go home first. This happens every time I turn on the printer. Is there a reason for...
I recently changed my printer to use 3 leveling points instead of 4, but this requires me to manually move the X and Y axes to the correct position rather...
Hi there, I completed a print with this firmware loaded on my printer and for some reason the print head did not move to the dock position like it normally...
I've noticed that the fan shuts off once it reaches 100% speed. I know that normally it only reaches 99%, but if you manually set it to 100% it'll shut...
Not a huge deal, but when accidentally trying to start a print with the printer power off (and the controller powered over usb). The screen goes blank until the controller...
I'm using my own build of the beta3 firmware. Sometimes, the on-screen HOME X command fails. 1. Move x to somewhere near the middle of its travel 2. Turn on/power-cycle...
Metadata
Owner
Metadata
This is a modified version of the Marlin 1.1.4 firmware for the WANHAO Duplicator i3 Plus 3d printer.