gsender

gsender copied to clipboard

Allowing the z height location to be modified after using the probing widget would greatly improve workflow. After probing for the Z-height, Generally the next step while working with wood...

J-eremy

- add A axis to initial gcode sent before start from line - modify and move GcodeToolpath file to backend

sophiabeluli

I would like to be able to clear the error history occasionally and maybe periodically clean job history. Sometimes it gets clouded when trying to troubleshoot errors to have so...

hamanjam

Feature - Configure Spindle Delay

8

On my shapeoko, spindle takes a bit longer to spin up - currently I have my own custom post processing that inserts a delay. It would be nice to have...

gcormier

I am running Version 1.4.7 on macOS talking to grblHAL. At the end of the job the job does not really end.  I've attached...

tcurdt

I am running Version 1.4.7 on macOS talking to grblHAL. I am running a job. I can see movements being buffered (different color in the visualizer) but at some point...

tcurdt

- put move to safe height by itself - remove ramp and replace with z movement

sophiabeluli

Hi, it would be great if the tool change workflow could be improved in the following ways: * Capture a tool change location in machine coordinates that gSender goes to...

repentsinner

- reset runner eeprom settings and reparse table when eeprom 511-513 have changed

sophiabeluli