error: 'Serial1' was not declared in this scope

[hitswa]

Trying to compile A6_swisscom.ino directly in arduino IDE and getting these errors...

A6_swisscom.ino: In function 'void setup()':
A6_swisscom.ino:8:17: error: 'Serial1' was not declared in this scope
A6_swisscom.ino:35:3: note: in expansion of macro 'A6board'
A6_swisscom.ino:36:3: error: 'Serial' was not declared in this scope
A6_swisscom.ino:42:16: error: 'OUTPUT' was not declared in this scope
A6_swisscom.ino:42:22: error: 'pinMode' was not declared in this scope
A6_swisscom.ino:43:21: error: 'HIGH' was not declared in this scope
A6_swisscom.ino:43:25: error: 'digitalWrite' was not declared in this scope
A6_swisscom.ino:44:13: error: 'delay' was not declared in this scope
A6_swisscom.ino:45:21: error: 'LOW' was not declared in this scope
A6_swisscom.ino:47:15: error: 'A6begin' was not declared in this scope
A6_swisscom.ino: In function 'void loop()':
A6_swisscom.ino:59:49: error: 'A6command' was not declared in this scope
A6_swisscom.ino:60:3: error: 'Serial' was not declared in this scope
A6_swisscom.ino:66:25: error: 'SendTextMessage' was not declared in this scope
A6_swisscom.ino:70:23: error: 'DialVoiceCall' was not declared in this scope
A6_swisscom.ino:74:27: error: 'SubmitHttpRequest' was not declared in this scope
A6_swisscom.ino:78:40: error: 'A0' was not declared in this scope
A6_swisscom.ino:78:42: error: 'analogRead' was not declared in this scope
A6_swisscom.ino:79:32: error: 'sendSparkfunGSM' was not declared in this scope
A6_swisscom.ino:8:17: error: 'Serial1' was not declared in this scope
A6_swisscom.ino:82:8: note: in expansion of macro 'A6board'
A6_swisscom.ino:85:13: error: 'delay' was not declared in this scope
A6_swisscom.ino: In function 'void SendTextMessage()':
A6_swisscom.ino:93:47: error: 'A6command' was not declared in this scope
A6_swisscom.ino:94:12: error: 'delay' was not declared in this scope
A6_swisscom.ino:8:17: error: 'Serial1' was not declared in this scope
A6_swisscom.ino:97:3: note: in expansion of macro 'A6board'
A6_swisscom.ino: In function 'void DialVoiceCall()':
A6_swisscom.ino:106:46: error: 'A6command' was not declared in this scope
A6_swisscom.ino: In function 'void SubmitHttpRequest()':
A6_swisscom.ino:115:43: error: 'A6command' was not declared in this scope
A6_swisscom.ino:8:17: error: 'Serial1' was not declared in this scope
A6_swisscom.ino:122:3: note: in expansion of macro 'A6board'
A6_swisscom.ino:124:13: error: 'delay' was not declared in this scope
A6_swisscom.ino:125:18: error: 'ShowSerialData' was not declared in this scope
A6_swisscom.ino: At global scope:
A6_swisscom.ino:148:22: error: 'byte' was not declared in this scope
A6_swisscom.ino:148:41: error: expected primary-expression before 'float'
A6_swisscom.ino:148:53: error: expression list treated as compound expression in initializer [-fpermissive]
A6_swisscom.ino:148:55: error: expected ',' or ';' before '{' token
A6_swisscom.ino:206:1: error: 'byte' does not name a type
A6_swisscom.ino:230:1: error: 'byte' does not name a type
A6_swisscom.ino: In function 'void A6input()':
A6_swisscom.ino:250:3: error: 'String' was not declared in this scope
A6_swisscom.ino:250:10: error: expected ';' before 'hh'
A6_swisscom.ino:253:9: error: 'Serial' was not declared in this scope
A6_swisscom.ino:254:7: error: 'hh' was not declared in this scope
A6_swisscom.ino:8:17: error: 'Serial1' was not declared in this scope
A6_swisscom.ino:257:9: note: in expansion of macro 'A6board'
A6_swisscom.ino:8:17: error: 'Serial1' was not declared in this scope
A6_swisscom.ino:260:9: note: in expansion of macro 'A6board'
A6_swisscom.ino:8:17: error: 'Serial1' was not declared in this scope
A6_swisscom.ino:264:9: note: in expansion of macro 'A6board'
A6_swisscom.ino:265:7: error: 'Serial' was not declared in this scope
A6_swisscom.ino: In function 'bool A6begin()':
A6_swisscom.ino:8:17: error: 'Serial1' was not declared in this scope
A6_swisscom.ino:272:3: note: in expansion of macro 'A6board'
A6_swisscom.ino:273:3: error: 'byte' was not declared in this scope
A6_swisscom.ino:273:8: error: expected ';' before 'hi'
A6_swisscom.ino:274:11: error: 'hi' was not declared in this scope
A6_swisscom.ino:276:36: error: 'A6waitFor' was not declared in this scope
A6_swisscom.ino:279:45: error: 'A6command' was not declared in this scope
A6_swisscom.ino: In function 'void ShowSerialData()':
A6_swisscom.ino:289:32: error: 'millis' was not declared in this scope
A6_swisscom.ino:8:17: error: 'Serial1' was not declared in this scope
A6_swisscom.ino:290:11: note: in expansion of macro 'A6board'
A6_swisscom.ino:291:5: error: 'Serial' was not declared in this scope
A6_swisscom.ino: At global scope:
A6_swisscom.ino:294:1: error: 'String' does not name a type
'Serial1' was not declared in this scope

Any solution?

[ivanpiffer]

From the first problem... Serial1 is only for Arduino Mega.