[Page No Found] Report the wiki page that you find it disappeared

[MatthewJeffson]

The change of wiki platform caused us to lose some pages

• Due to the transition to a new wiki platform, we unfortunately experienced some loss of pages.
• We apologize for any inconvenience this may have caused and appreciate your patience as we continue to improve and optimize our wiki platform.
• We have been working diligently to recreate and restore as much content as possible.

Please let us know what pages you faced is disappeared.

[Eee14]

I found two 404s at https://wiki.seeedstudio.com/get_start_round_display/#arduino-library-overview ： https://www.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-tft-library https://www.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-lvgl-library

[MatthewJeffson]

I found two 404s at https://wiki.seeedstudio.com/get_start_round_display/#arduino-library-overview ： https://www.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-tft-library https://www.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-lvgl-library

Hello, the urls should be : https://wiki.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-tft-library and https://wiki.seeedstudio.com/using_lvgl_and_tft_on_round_display#common-interfaces-for-lvgl-library Sorry for such late reply and the inconvenience

[gregwa1953]

I was looking for the Ardupy Getting Started page - https://wiki.seeedstudio.com/ArduPy/ Ended up with PAGE not found.

Plus the pip3 install for Ardupy fails, at least on my version of Python 3.11.1. I don't know where else to report it.

[MatthewJeffson]

Hi, thank you for the report and the wiki page has been updated. https://wiki.seeedstudio.com/ArduPy/ Really appreciate!

[AlvaroHermida]

Everything SenseCAP related fails with this error. Is SenseCAP abandoned already?

Just two critical errors as an example:

• In the default firmware: the "Set API Key" QR fails, destroying all the subsequent functionality.

• In the package

, printed on the back, over the text "Get Started", suggesting the user "you did it again, you bought another expensive brick (dead platform)"

Maybe a third error is also printed on the back, over the text "Buy Product". In this case, the error is the fact that the page works, letting you buy a dead platform (if this is the case).

[MatthewJeffson]

Hi! I'm sorry for your bad experience using the board. We have the tech support platforms specific for SenseCAP and you can find them under the pages of SenseCAP products. Would you mind creating an issue ticket on the SenseCAP Help Center and our experts will help you with it. Thanks!

[holdenweb]

I was looking at your Grove Starter kit (with a view to buying six for an upcoming workshop) on. https://coolcomponents.co.uk/products/grove-starter-kit-for-raspberry-pi-pico

The documentation link on that page to https://wiki.seeedstudio.com/Grove_Shield_for_Pi_Pico_V1.0/ is broken. I believe it should point to https://wiki.seeedstudio.com/Grove-Starter-Kit-for-Raspberry-Pi-Pico/.

Now I've read the Wiki page I'm off to purchase those six I wanted - it looks like an excellent MicroPython teaching resource.

I also see this is a link fro a reseller, so I'll contact the direct leaving the issue here so I can link to it.

[MatthewJeffson]

Thank you for your interests in our products! And I really appreciate you report it on the GitHub. I will find a solution to solve it.

[AlvaroHermida]

Hi! I'm sorry for your bad experience using the board. We have the tech support platforms specific for SenseCAP and you can find them under the pages of SenseCAP products. Would you mind creating an issue ticket on the [SenseCAP Help Center]

Sorry, wrong answer.

I'm not reporting an issue of SenseCAP: Both broken urls are being correctly called from the firmware and from the printed package (please, note you cannot ask users to "edit the package" to cover a web administration bug).

Both broken links redirect here asking to report, so the "new platform" can be patched to solve the errors caused by the wrong implementation of the "new platform".

...And you asked for this reports:

... we unfortunately experienced some loss of pages. ... We have been working diligently to recreate and restore as much content as possible. Please let us know what pages you faced is disappeared.

The two urls whose functionality must be restored (without ruling out more errors) are the following:

1. https://wiki.seeedstudio.com/Sensor/SenseCAP/SenseCAP_Indicator/Set_An_API_Key/
2. https://wiki.seeedstudio.com/Sensor/SenseCAP/SenseCAP_Indicator/Get_started_with_SenseCAP_Indicator/

Thanks.

[MatthewJeffson]

The two urls whose functionality must be restored (without ruling out more errors) are the following:

1. https://wiki.seeedstudio.com/Sensor/SenseCAP/SenseCAP_Indicator/Set_An_API_Key/
2. https://wiki.seeedstudio.com/Sensor/SenseCAP/SenseCAP_Indicator/Get_started_with_SenseCAP_Indicator/

Thanks.

Oh sorry I misunderstood you before. The correct addresses I think should be:

1. https://wiki.seeedstudio.com/SenseCAP_Indicator_How_to_Set_the_API_Key/
2. https://wiki.seeedstudio.com/SenseCAP_Indicator_Get_Started/

I will contact my colleagues to make sure the QR code negative the right addresses. Thank you! Really appreciate!

[AMInnovationTeam]

Missing: https://wiki.seeedstudio.com/reComputer_Jetson_Series_Started_Guide/

Link is mentioned under the wiki hyperlink on https://www.seeedstudio.com/Jetson-10-1-H0-p-5335.html

[MatthewJeffson]

Hi! @AMInnovationTeam Thanks for pointing it out. I really appreciate it! The page has been changed to this: https://wiki.seeedstudio.com/NVIDIA_Jetson/ (I thought I got it all out, guess not:D) Anyway, thanks! I will convert it soon. Best Regards, Matthew

[AMInnovationTeam]

Hi @MatthewJeffson, thank you for the quick response. Another broken one I just found: https://wiki.seeedstudio.com/Flash_System_on_SD_card/

This is mentioned near the bottom of this page under the "Flash System on SD card" hyperlink: https://wiki.seeedstudio.com/reComputer_J1020_A206_Flash_JetPack/

[MatthewJeffson]

Sure~ I will take care of it! Thanks! @AMInnovationTeam

[tak5633]

Hi. I just came across this broken link: https://wiki.seeedstudio.com/Tutorial-of-A20X-Carrier-Boards/

[MatthewJeffson]

Hi @tak5633 ! Thanks for pointing it out! Are you using the reComputer J1020v1? which is built around the A206 carrier board. And the new link will be https://wiki.seeedstudio.com/reComputer_J1020_A206_Flash_JetPack/. Or you can find much more information at the index page. I have seen three places that include the broken links, thanks again.

[tak5633]

Hi @MatthewJeffson! Thanks for the response. I'm actually using the reComputer J1020v2 built around the J202 carrier board. I found this link a little while after posting my message: https://wiki.seeedstudio.com/reComputer_J2021_J202_Flash_Jetpack/. That has been very helpful so far.

[Wlpeout]

From page https://www.seeedstudio.com/Grove-Shield-for-Seeeduino-XIAO-p-4621.html?queryID=99f5176f13bc8d35d94ec6d6ce80a04a&objectID=4621&indexName=bazaar_retailer_products

Link https://wiki.seeedstudio.com/Grove/

Page Not Found

[MatthewJeffson]

Hi! @Wlpeout Thank you for pointing it out and the page I think have been converted into this: https://wiki.seeedstudio.com/Grove_System/

The contents are kind of old and we are looking for someone who have the ability to update it. Anyway, I will make the link right and thanks again! Best Regards, Matthew

[Wlpeout]

Hi Mathhew, Thanks for looking into this so quickly. Since I just received my first board today it’s all new to me even if the content is old, anything helps 😊

Kevin

From: Matthew @.> Sent: Wednesday, October 11, 2023 7:00 PM To: Seeed-Studio/wiki-documents @.> Cc: Wlpeout @.>; Mention @.> Subject: Re: [Seeed-Studio/wiki-documents] [Page No Found] Report the wiki page that you find it disappeared (Issue #449)

Hi! @Wlpeouthttps://github.com/Wlpeout Thank you for pointing it out and the page I think have been converted into this: https://wiki.seeedstudio.com/Grove_System/

The contents are kind of old and we are looking for someone who have the ability to update it. Anyway, I will make the link right and thanks again! Best Regards, Matthew

— Reply to this email directly, view it on GitHubhttps://github.com/Seeed-Studio/wiki-documents/issues/449#issuecomment-1758794403, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3FKQMTCDUG5B67EWJMXPOTX65FI7ANCNFSM6AAAAAA2WSKZII. You are receiving this because you were mentioned.Message ID: @.@.>>

[BobKerns]

https://wiki.seeedstudio.com/ArduPy-LCD/, linked from https://wiki.seeedstudio.com/ArduPy/

[BobKerns]

https://wiki.seeedstudio.com/ArduPy-Libraries/, linked from https://www.seeedstudio.com/blog/2020/10/28/circuitpython-vs-ardupy-which-is-better-for-micropython-microcontroller-programming-m/

[MatthewJeffson]

Thank you! Bob! @BobKerns The urls have been fixed. Best Regards, Matthew

[aquacalc]

Page not found when hit the "Seeed Gas Sensor Selection Guide" link under "Tip" callout found on this page:

https://wiki.seeedstudio.com/Grove-Multichannel-Gas-Sensor-V2/

[AMInnovationTeam]

Missing: https://wiki.seeedstudio.com/install_NVIDIA_software_to_Jetson-10-1-A0/

Link is mentioned in the aqua coloured "Note" panel in the line "Please check our wiki for reflashing Jetpack and expandinging storage." (also a typo too "expandinging" if you wanted to fix as well) on this page: https://www.seeedstudio.com/Jetson-10-1-H0-p-5335.html

[MatthewJeffson]

@aquacalc Oh, I'm sorry the page should be "https://wiki.seeedstudio.com/Seeed_Gas_Sensor_Selection_Guide/". I will change it soon. Best Regards

[MatthewJeffson]

Hi! @AMInnovationTeam Thank you for the notification! I will change it soon! Best Regards

[AMInnovationTeam]

Hi! @AMInnovationTeam Thank you for the notification! I will change it soon! Best Regards

Thanks @MatthewJeffson! I checked the link and I think it was accidentally changed to instructions for the wrong module (links to instructions for J1010 instead of J1020v1).

I believe this is the correct link: https://wiki.seeedstudio.com/reComputer_J1020_A206_Flash_JetPack/

[MatthewJeffson]

Oh! @AMInnovationTeam Yes indeed it is the J1020 page, I will have it changed soon! Thanks!

[acostach]

J2021 with Xavier NX re-flashing page is missing, link from https://www.seeedstudio.com/reComputer-J2021-p-5438.html takes to https://wiki.seeedstudio.com/Tutorial-of-A20X-Carrier-Boards/ I was interested in whether there's any changes needed before flashing standard Nvidia Jetpack or the J2021 is fully compatible with the devkit. Thank you