ToolBin

ToolBin copied to clipboard

Failed to set sector size!

1

### Problem I'm receiving error message `Failed to set sector size!` while trying to change the sector size of my ST2000NM017B devices from 512 (default) to 4096. ``` ~/SeaChest/SeaChestLite/Lin64/Non-RAID/x86_64 #...

clertes

### Problem Firmware upgrade failure, with segmented download variable it says 'successfully upgraded to SN03' (which is current firmware) Block size failure as well. Log attached [https://pastebin.com/CAmwTbfc](url) ### Expected behavior...

nachopants

SeaChest-lite SetSectorSize does nothing

5

### Problem When I try to change the sector size on a Exos 16 to 4kn nothing happens. I start the process with the arguments"-d PD3 --setSectorSize 4096 --confirm this-will-erase-data"...

johnteh00

Format unit failing with Format Unit Not Supported

1

### Problem I am attempting to switch some Seagate ST12000NM0027 SAS drives from 512e to 4kn using this command: ``` openSeaChest_Format -d /dev/sg6 --formatUnit 4096 --fastFormat 1 --confirm ``` This...

taylorjonl