SeByDocKy

I also maybe saw a tiny mistake in your code tor the QPIGS -> value_pv1_input_current_ ... it's scanned with a %d and should be a %f according to the manual...

Ok I modified all your code to add the QPIGS2 command and everything related.... It's compiling fine :) Need to wait sun to test results on my PIP8048. I am...

> I'm not the author. Just a contributor. Like you? ;-) Common :) .... you did the JKBMS & the PIPsolar :).... there are masterpieces...

Hi before to test my modification, I am trying to collect at least some informations from the official pipisolar integration Very strange..... I collected this log : ```INFO Reading configuration...

Hi @syssi, I solved my problem of bad wiring and also tested my fork to integrate the GPIGS2 command. It works perfectly.... Your code is just incredible :)

Hi @syssi Got a new question concerning the PIPsolar integration. With my PIP8048, I need to define the BATTERY_BULK_VOLTAGE output command. In a first attempt, I added the new command...

> Could you provide the manual another time? The wetransfer link isn't available anymore. Are you sure the command is called `PCCV`? Do you mean `PCVV` (Constant Voltage Charging Voltage)?...

Mea culpa it's PCVV and not PCCV :) Now it's working fine :)

Hi @syssi, just reading more deeply the axpert max protocol manual, and I discovered a very interesting output command "PBATCD" which allow to enable/disable charging/discharging for the inverter. I think...

To be more précise ```3.30 PBATCD: Battery charge/discharge controlling command Computer: PBATCD Device: (ACK if device accepts this command, otherwise, responds (NAK a = Discharge completely on/off b = Discharge...