Keep_alive not working

[HappyPlotter]

Describe the bug The thermostat is controlling a shelly device. I have enabled the keep_alive to 1 minute and in the shelly I have the timer off set to 10 minutes. Normally the timer should be reset back to 10 minutes every keep_alive period so every minute in my configuration

To Reproduce Set the keep_alive to 1 minute and check if it updates the value

Additional context keep_alive works fine with generic thermostat, it is not woking correctly with dual thermostat

[tantra35]

In my case, i relatively fixed this by setting min_cycle_duration, and its seems to work

[HappyPlotter]

I have minimum cycle set but it does not fix the keepalive. I have not made an automation that every minute turns on the shelly. Which essentially "keeps alive"

[ScratMan]

I have minimum cycle set but it does not fix the keepalive. I have not made an automation that every minute turns on the shelly. Which essentially "keeps alive"

Please test the alpha release v2024.6.2-alpha1, if it fixes it I'll make it official.

[HappyPlotter]

It might take a while until I get my hands on another shelly. The one that is on the heater is not easy to be removed/tested since now we have 35+ degrees

[ScratMan]

Disconnect the heater, and plug the Shelly on a light (or an ohmmeter if it's a dry contacts relay switch).