Hackintosh-Intel-i9-10900k-Gigabyte-Z490-Vision-D
Hackintosh-Intel-i9-10900k-Gigabyte-Z490-Vision-D copied to clipboard
SchmockLord
Post your Experience with Release #v4.9 / OC 0.7.0 here
Hi,
can anyone who tried my current Release v4.9 with OC 0.7.0 post their experience here?
@jamesfawcett I have seen you like the release. If you already use it, please post your experience here.
Hi @SchmockLord everything worked perfectly!
I saw there's quite a few changes in this version, a lot less settings the config.plist.
I am using a different motherboard, mine is an Aorus Pro z490 but most of your config always works for me. I still use USBinjectAll and I use an older audio setup from one of your old configs so my headphones work.
One thing I noticed with this upgrade in your 20,2 Computing Only is a device change from:
<key>PciRoot(0x0)/Pci(0x1C,0x1)/Pci(0x0, 0x0)</key>
to
<key>PciRoot(0x0)/Pci(0x1B,0x2)/Pci(0x0,0x0)</key>
Which device is this? I don't have either of those addresses in my system.
Thanks James
@jamesfawcett Thanks. Exactly things like these I wanted to identify. Mistakenly I took the wrong PCI-Address for the 2.5Gbit Ethernet. It still is: PciRoot(0x0)/Pci(0x1C,0x1)/Pci(0x0, 0x0)
Fixed that in the current release.
That's good to know I didn't realise that was the Ethernet. My address is slightly different on the Aurus Pro z490 so I've updated it to match mine PciRoot(0x0)/Pci(0x1C,0x4)/Pci(0x0,0x0)
Thanks for all your hard work!
Cheers James
Hi, Chris I have just installed your EFI 4.9, OC(0.7.0). Everything seems to work fine. The sidecar function is working, for example. In the config file, in plateforminfo/Generic/Rom, there is the following code between the square brackets <11223344 5566>, whereas in the previous version, there was nothing (<>). Once again, congratulations Best wishes, Frédéric
I would also like to share my experience while running of OC 0.7.0 with only a iGPU here: Everything works fine! Thanks Chris for your project and support!
I have not updated since (0.6.5) and just tested 0.70 on Big Sur here are my thoughts:
- Seems startup speed as increased slightly since 0.6.5
- 2.5GBe is not functional I have tested using the latest revision of 0.70 and macOS is unable to detect an ethernet attached into the 2.5GBe slot yet works flawless on 0.6.5. I am going to do some testing and will report back if I get it resolved. Thanks Chris!
If 2.5Gbit Ethernet doesn't work, see the note to my current release v5.0.
@SchmockLord my notes on the new release (first impressions):
- works on macOS Monterey
- 2.5Gbit working
- system is detecting rx5700xt (was not detecting on the previous release with beta flag)
Discovered problem: audio not working as it should. Having problems with both headphones & regular audio
Hello, thank you very much for your great work, your help was very precious to install Big Sur with the same hardware configuration as you. I have used OpenCore 0.7.1 and BigSur 11.4. I just want to point out two issues during the installation. I had to set XhciPortLimit to False to continue with the installation of 11.4. (As explained in a note in the OpenCore guide) Also, I am currently only using the iGPU because I don't have a graphics card. I used your "iGPU display output.plist" file. During installation, I had numerous HDMI interruptions. I had to unplug and plug in repeatedly to find the apple image on the screen. I still managed to install the system with patience. But then, every time the system was opened after booting, the HDMI would turn off. I had to unplug and re-plug the cable each time to get the logon image. Then, I modified this line in NVRAM / boot-args: agdpmod=pikera shikigva=80 -lilubetaall keepsyms=1. I replaced it with -wegnoegpu igfxonln=1 igfxfw=2 keepsyms=1. Now HDMI does not turn off, the screen does not turn off. Everything seems perfect now. (I still have to check the correct behavior of the USB) Maybe I forgot some details when I created the EFI or forgot a step, maybe the error came from me, but this comment can help. Thank you again very much
