Hackintosh-Intel-i9-10900k-AsRock-Z490-Phantom-ITX-TB3

Hackintosh-Intel-i9-10900k-AsRock-Z490-Phantom-ITX-TB3 copied to clipboard

BCM94360NG 5G-Wi-Fi not working full speed, only 434mbps and 1 nss

4

I‘ve got exactly same CPU&Motherboard&WifiCard with dear efi author @SchmockLord, and the building&installing went very smooth, nothing wrong. Airdrop,handoff,Sidecar all fine. But wifi speed didn't workout as expected, under macOS...

hangdiao

I have this build working wonderfully. Thanks for all the hard work and putting this out there. Has anyone managed to upgrade the OS to macOS Catalina? I have tried,...

mattbowlby

Only the front USB port is working

20

I have the same CPU and mobo as yours with RX 6800XT GPU. So your EFI folder should just work. Everything else works flawlessly except for USB ports (Thunderbolt port...

henryxrl

Only one USB port is working with the latest release (v3.4)

4

With the latest release only the right Front-USB-Port ist working. I read that you switched back to the old assignment method. Maybe there is a bug in there. Does the...

frogger23

Based on the instructions, the current config.plist files that are now included do not match up. Could you update your instructions to align with what each new file does and...

RaginBajin

TB3 firmware

1

Hello, I read everything, but I am still not sure which modified firmware I should use, can you tell me? Thanks advance https://www.tonymacx86.com/threads/success-gigabyte-designare-z390-thunderbolt-3-i7-9700k-amd-rx-580.267551/page-1639#post-2087524

hayasakaovo

-Current revision is for Big Sur ? -Question about compatibility with iGPU only config

4

Dear SchmockLord, thank you for sharing your config,guide and EFI folder. I am building an hackintosh that will be 90% equal to your configuration. I am buying same motherboard, I've...

klougithub

 Hello, I am trying to do the same build, when I select the option install catalina I get a prohibited logo, after this the system reboot again. Help please...

ferjums7

USB mapped all devices including the ones on riser board

2

I spent countless hours trying to get all usb ports to work especially the difficult ones on the riser board. finally nailed it. Also put labels on all the usb...

htoomyintnaung

AIO on internal usb - liquidctl cannot find AIO

2

Hi, using a Kraken x53 attached to the internal usb-port i was hoping to use liquidctl (https://github.com/liquidctl/liquidctl) to control the noise. Booting to Windows and controlling the speed is working...

PFalko