Moppy2
Moppy2 copied to clipboard
Sammy1Am
The evolution of the Musical flOPPY controller
no idea what is going on, i am not very good at c++ so i will send this ``` C:\Users\-\AppData\Local\Temp\ccoQd4Ct.ltrans0.ltrans.o: In function `setup': C:\Users\-\Downloads\Moppy2Microcontroller-2.1.0\Moppy2-Arduino\main/main.ino:72: undefined reference to `MoppySerial::begin()' C:\Users\-\AppData\Local\Temp\ccoQd4Ct.ltrans0.ltrans.o: In...
I have pin 18 plugged into a5 and pin 20 plugged into a4. All other pins seem to work with the drive im using and all my other drives don't...
I am looking to use an old 360k 5.25 floppy drive with this (thing has a nice loud stepper motor) But since the controller is expecting all drives to be...
Hello, I can get one FDD to play music but not two. I tested the outputs with a speaker and i heard that only pin 2 and 3 were outputting....
Hello, I'm stuck on trying to run the Moppy2 GUI. I have installed JAVA as I usually used to on every computer. It seems that the GUI needs something different...
I have my pins set up as pin 11 to 12 pin 18 to pin 3 on the arduino pin 20 to pin 2 on the arduino and pin 19...
So I have my drives connected to the Arduino and they connect and output sound, but I find that some drives are very quiet depending on where they're plugged in...
Hi, I've been trying to run the control gui it opens for about a frame and then closes. I am running Java 8 64-Bit. I have noticed my Java and...
So after I finished connecting 1 floppy disk, and the 4 starting notes appeared, I tried to move to the next step which is running the moppycontrolGUI.bat, but here's the...
