x-cube-azrtos-f4

x-cube-azrtos-f4 copied to clipboard

Development Environment : STM32CubeIDE Version: 1.13.1 X-CUBE-AZRTOS-F4 V1.1.0 Issue : LevelX NOR Custom interface Code Generation problem File : STM32CubeMX\templates\fx_stm32_custom_driver_c.ftl static UINT lx_nor_driver_read(ULONG *flash_address, ULONG *destination, ULONG words) { UINT...

got748

I have a custom stm32f407igt6 board with LAN8742A eth interface. I got a problem that i can get eth work in 10MBITS_HALFDUPLEX mode only. I have checked nx_stm32_phy_driver.c and nx_stm32_eth_driver.c,...

gausstop

**Describe the set-up** I try to migrate USBX CDC ACM to STM32F407ZGT6. Now USB Device can be recognized by Computer as STM32 USB Device. But I can't read any data...

FengChendian

version conflict

2

Hi, version 6.5 does not support x-cube f4 v1.0 how to solve this issue ? V1.1 of x-cube is there , is it comatible with versions of cubemx above 6.4...

nawazawanswl

USBX CDC ACM There is a problem with ux_device_class_cdc_acm_write

1

I ported ThreadX and USBX on STM32F105RBT6. The USBX HID works well. When I try to use USBX CDC, the problem arises. I am using The USBX sample app of...

arilink-tech

NetX status request for ethernet driver failure

1

_nx_driver_get_status in common/drivers/ethernet/nx_stm32_eth_driver.c does not set value pointed by driver_req_ptr -> nx_ip_driver_return_ptr thus caller consider request failed.

ucayalifish

netxduo dhcp+autoip+mdns instability

1

**Caution** The Issues are strictly limited for the reporting of problem encountered with the software provided in this project. For any other problem related to the STM32 product, the performance,...

ucayalifish