Control Mpper - Unable to Bridge/Flash Arduino ATmega32U4 Pro Micro - 'Could not open serial port'

[Dreese001]

Describe the bug Unable to Bridge/Flash Arduino ATmega32U4 Pro Micro - 'Could not open serial port'

Simhub version 9.4.13

Third party plugins Not sure of this

To Reproduce Steps to reproduce the behavior:

1. Go to 'Control Mapper'
2. Click on 'Bridge then 'Flash Update''
3. Select 'COM40'
4. Leave 'Single Controller' selected
5. Tick 'I understand'
6. Click 'Flashversion 1.3'
7. Error - could not open serial port

Expected behavior ATMega to be flashed so that I can use in Control Mapper

Screenshots

• see attched

Log files Join log files available in C:\Program Files (x86)\SimHub\Logs Note : Bug reports not joining proper log files won't be processed (Never join logs screenshots/photos/extracts, please exclusively join complete logs files). SimHub.1.txt

How to attach files : https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/attaching-files SimHub.1.txt

Additional context I've manually changed the Com Port number various times but same error

[SHWotever]

Hi ! Could you try to flash it with a blank sketch with a basic arduino IDE to see if it reacts correctly ? Seeing the error it looks like the arduino is not behaving as it should.

you can download the arduino ide here : https://www.arduino.cc/en/software

[Dreese001]

Looks to be an issue with Arduino

[Dreese001]

I purchased another Arduino (Leonardo this time). It flashed with no issue. Control Mapper is now setup and working. Thanks SHWotever