Ryujinx-Games-List
Ryujinx-Games-List copied to clipboard
Ryujinx
Splatoon 2 - 01003BC0000A0000
Splatoon 2
Game Update Version : 5.5.0
Current on master : 1.1.272
Graphics Backend : Vulkan & OpenGL
Splatoon 2 easily hits the intended 60fps with decent hardware. The game is almost completely stutter free as soon as all shaders have been cached (Vulkan recommended!) The story mode works as expected including the DLC. Motion Control can be disabled in the settings after the tutorial. You can easily finish the tutorial by using splat bombs & shooting while jumping. No save file needed for this! On a select few levels later in the game, Vulkan can suffer from degraded performance (Sector 4 Kettle 19 is one example). Switch to OpenGL if you encounter this.
LDN (2.5 currently) works great (requires a stable internet connection and everyone to have at least a few shaders prebuilt). Note: A 100% save is recommended as you can only unlock new weapons & clothes with the use of NSO and not on Ryujinx itself.
Hardware Specs :
CPU: Ryzen 7 5800X
GPU: NVIDIA RTX 3080 Ti
RAM: 32GB
Screenshots :
Small correction: It requires motion controls, not touch controls. And completing the tutorial is possible without them, even if doing so is a bit hard.
Wouldn't it be possible to intergrate with BetterJoyforCemu? Motion works perfectly fine for me with it
Just a note: The ballons do not need to be popped in the tutorial, you can go past them. You just have to get to the end
Game is crashing for me on first loading screen with latest update applied using LDN 2.4 on Manjaro
Splatoon 2
Game Update Version : 5.5.0
Current on master : 1.0.7171
Splatoon 2 runs without any issues and can easily hit the intended 60fps with decent hardware. The game is almost completely stutter free as soon as all Shaders have been cached. The storymode works as expected (Including the DLC)! Motion Control can be disabled in the settings after the tutorial (You can easily finish the Tutorial by using splat bombs & shooting while jumping).
LDN works great (requires a stable internet connection and everyone to have at least a few shaders prebuilt) Note: A 100% save is recommended as you can only unlock new weapons & clothes with the use of NSO and not on RYujinx itself
Sometimes users experience a crash after the menu: This can be fixed by only setting one player in the input section!
Hardware Specs :
CPU: Ryzen 5 5600X @4,7 Ghz
GPU: Nvidia RTX 2080 Ti
RAM: 32Gb @ 3200 Mhz
Screenshots :
Disable Motion Control:
LDN Lobby:
@Niwu34 can you do a full re-test to see if the multiple-controller crash/bug is fixed?
Soooooo, ryujinx crashes on my mac after the "NINTENDO PRESENTS SPLATOON 2" and I tried multiple times but to no avail, i tried running via terminal, and these were its last words: "MTLTextureDescriptor requests 10 mipmap levels, but the dimensions (511, 171, 1) can only support a maxiumum of 9 levels".
PS: I tried with mario kart 8 and that runs fine
Log:
CPU: Apple m1 pro Game Version: 1.0.0, 5.5.1 w/wo DLC Ryujinx Version: 1.1.0-macos1
Keeps crashing, cannot make it past tutorial.
How can i solve the problem? Emm... is there a way to view the way of this problem solved?
Anyone else get issues like these in Octo Expansion levels? Inkable surfaces get this stripe-y pattern instead of getting fully coated. They might not let you disappear into the ink as a squid or climb walls as easily. Goes away after reloading the level 3-4 times, but can come back as well when you pay the test fee again. This has been happening ever since I started playing on build 1.1.812 and continues on 842. Can't seem to find any other references to this too. (for ref, I have an AMD RX 6600, and this is under Vulkan. Haven't tested under OGL because of bad performance.)
I am experiencing a similar issue but this time in Splatoon 3. In some levels either buttons cannot be activated or walls can't be painted properly due to the before mentioned "stripe-y pattern". This has only occured a couple of times, namely in Site 1 "Doors, Doors, Doors!" and in Site 2 "Getting lost in three easy Steps". For example in the hub world everything works as intended. Currently I am running Ryujinx 1.1.889 (Windows 10) on Switch firmware 16.0.3 with Splatoon 3 version 4.0.1.
There's a problem with the squid/octopus form, the squid/octopus form doesn't sink into the ink well at all, it keeps popping up then sinking back down again. It's a big problem for story mode levels where you have to climb up walls. Another problem is that the game thinks that I'm in enemy ink when I'm clearly standing in my own ink or when I'm literally on no ink at all. You can notice this when shooting ink with your weapon. It's also possible for a squid/octopus to swim on walls without ink at all. Another random bug I've noticed is that a special immediately gets charged up when just inking once at the ground. This applies to all weapons, not sure if this is intended or not though.
Game version: v5.5.1 Emulator version: Ryujinx 1.1.1279 CPU: Apple M1 GPU: Apple Apple M1 GPU Drivers: Vulkan v1.2.231, Driver v0.2.2008 RAM: 8GB
https://github.com/Ryujinx/Ryujinx-Games-List/assets/166998995/0ed1711d-3e0a-40cc-a1b6-f49875f7bf94
https://github.com/Ryujinx/Ryujinx-Games-List/assets/166998995/1a8e8046-92dd-4d90-ad33-b7bc3fd6e1ad
I am having the same problem as seen in the last posts, i could do the base campain with rarely having any problems but ocassionaly ink would stripe? and bug out, making it sometimes not work corrretly. In the expansion it got unplayable as it happens constanly and its easy to test, in my case i can go to c11 and just ink the entrance to the zone and it will stripe and bug in weird ways like counting as enemy ink or if it was not there and ocassionaly just working fine.
This is happening since a long time but at the beggining was more ocassional, i also tried on the ldn version and got the same. Could not try on opengl because it just crashes for me at loading c11.
Forgot to mention this is in Windows 10 with latest updates but also tried in a version of linux that i had around (Bazzite 3.0.1)
Game version: 5.5.1 Emulator version: Ryujinx 1.1.1334 CPU: AMD Ryzen 1600 GPU: AMD RX480 (With latest drivers) RAM: 16GB
Ryujinx_1.1.1334_2024-06-16_18-57-53.log
Game crashes on character hair customization screen
Ryujinx 1.1.1345 Game version 5.5.1 Mac mini M2 Pro 16GB RAM
Ryujinx_1.1.1345_2024-07-12_15-01-06.log
and then next it crashes after tutorial starts after "let's start with the basics"
Ryujinx_1.1.1345_2024-07-12_15-06-55.log
then again after "Splatoon 2" screen. it just keeps crashing.
Ryujinx_1.1.1345_2024-07-12_15-08-55.log
