Ryoandr

I believe this happens with 1.4.3.9 mingw version. Gonna test msvc 32 and 64 versions right now.

Exact same behavior with all 3 versions, with both AC3 and DTS files...

tried another DTS file, it worked (mingw) but I still got the `start cut value is greater than length of input file` error if working with ms. log ```[Input info]...

tried another file, again got nothing happening. log: ```[Input info] Bitrate=1536 Actual rate=1509.75 Sampling Frec=48000 TotalFrames=238310 Bytesperframe=2013.0000 Filesize=479718030 FrameDuration= 10.6667 Framespersecond= 93.7500 Duration=00:42:21.973 Channels mode=C+L+R+SL+SR LFE=LFE: Present [Target info] StartFrame=944...

if you need to know sources, 1st files is from Lacuna Coil Karmacode 5.1 mix dvd (it's not a dvd audio), dts and ac3 tracks 2nd is from Interstella 5555,...

Just a heads up, I fitted my HD-VC9900 with a PCM1808 board that you can find for cheap on aliexpress, and it worked a treat. Only annoyance was the heatsink...

> @Ryoandr > > Could you post a picture how you wired op you're pcm1808? > > I tried this mod on mine, but now I have no HDMI output...

> @Ryoandr You have to connect 3.3V to pin 2 of regulator no, this is the 1.8v regulator. There's 3.3v on pin 3 comming from the DC-DC buck. Pin 2...

I did remove them, it's just some residual solder that makes it look like caps still on

I tested several AES and MVS, and in my results some MVS are unable to sync and all AES were unable. I sent Rama 2 MVS, one that worked and...