Roy-043
Roy-043
Scaling should not change unconstrained elements. That is hardly acceptable IMO.
This is a theming issue. The behavior with the Classic theme has not changed between v1.0 and v1.1. For wide items in a narrow column that theme will use ellipses....
Thanks for picking this up. I have some questions/remarks: 1. Would it not be better/possible to change the group handling of the Draft WB to also recognize a Std_Part as...
I lack the knowledge to review this PR. But everything seems to be in very good hands. :relaxed:
I have removed some rogue comments.
I suspect the issue is caused by this line: https://github.com/FreeCAD/FreeCAD/blob/f7483a08b4ef3efd02fe3a381de9b253a2b53fbb/src/Mod/Part/App/TopoShapeExpansion.cpp#L2681 Inner wires that are circles are not put in a compound, inner wires that have more than one edge are....
This is still an issue.
The PR is still marked as Draft.
Your action is problematic. You have a line and two arcs that have a tangent constraint with that line. Making the two marked points coincident would reduce the length of...
On Linux FreeCAD crashes.