Root-4-CNC

Root-4-CNC copied to clipboard

tweaking instructions to make tramming easier later

2

readeral

38mm steel tube for US market

19

In the US market 38mm square steel tube is standard. Is it possible to reduce the dimensions of the steel tube mounting points from 40x40mm to 38x38mm (by only moving...

colemanomartin

Modification suggestion for Carriage

1

I have a modification suggestion for the carriages: My model look like this:  The main modification is that the force will not be transferred into a small area of...

masterxq

FK and FF are swapped around for the Y axis mounts. https://github.com/RootCNC/Root-4-CNC/blob/master/Source/STL_Files/Y_Axis_Mount_FK12.STL This is the FF side, it doesn't have the mounting holes for the motor. X seems fine. During...

apopanda

69mm Router Mount Needed

2

Need a 69MM router mount for my Root 4 to mount a Makita RT0700, but only see that for the root3 on Thingiverse? Any guidance would be much appreciated.

BayouBurner