XIRIS

@hallard Here is the source https://www.aliexpress.com/item/BME280-Digital-Sensor-Temperature-Humidity-Barometric-Pressure-Sensor-New/32672562548.html?spm=2114.13010608.0.0.VVVh4V I have tested this modules from this seller and works fine. But be careful and read my previous post - there are modules on...

Sure – here i am From: rmoscetti [mailto:[email protected]] Sent: Monday, July 10, 2017 9:37 AM To: matthijskooijman/arduino-lmic Cc: Roberto6969 ; Mention Subject: Re: [matthijskooijman/arduino-lmic] Lower power consumption (#82) I am...

Hi Roberto, i am out of office and i will respond you in a few days. BTW: if you want to achieve the lowest consumption you have to use only...

Hi Roberto, as i pointed out before if you want to achieve low power consumption as it is possible you have to avoid using development boards. With MCU AT328P with...

Regarding to Radek's answer: I woul like to check boxes but it is impossible. If I try to check box at the beggining of the line it red crossed circle...

Hi @radekskrivan, nevermind - I am happy you confirmed my findings and my issue is not result of missing experiences from my side. Anyway, this software is admirable - congrats...

It seems as speed is not setup correctly (but it is, 9600 in this case). This is from serial monitor: 

Some background info: I using Mega 2560 PRO MINI board. I have tested jbanaszczyk/pms5003 library and iz works well as long as I have read procedure in main loop. Soon...

I did not change the code - it is your's Advanced from Examples. USB/COM adapter is connected to RX/TX lines on 2560 board

2560 has its own RX/TX pins (RX=4, PE0, TX=5, PE1). I believe this is the problem. Do you mean pin definition in your code? I can not find any pin...