can fetch ssid list, but auth always failed

[jezhang2014]

[WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][ESS]

wpa_cli: <3>CTRL-EVENT-STARTED-CHANNEL-SWITCH freq=2447 ht_enabled=1 ch_offset=0 ch_width=20 MHz cf1=2447 cf2=0 <3>CTRL-EVENT-ASSOC-REJECT status_code=1 <3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="xxxx" auth_failures=3 duration=30 reason=CONN_FAILED <3>CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD

cf-812AC (Realtek 8812BU) idVendor=0bda, idProduct=b812, bcdDevice= 2.10

[RinCat]

I need more logs, try set log_level DEBUG in wpa_cli, and also dmesg logs.

[jezhang2014]

Thanks!

After I issue command: wpa_cli log_level DEBUG, it shows OK, but seems no more new log message printed out. <3>CTRL-EVENT-SSID-REENABLED id=0 ssid="xxx" <3>Trying to associate with ec:23:7b:35:b3:f0 (SSID='xxx' freq=2447 MHz) <3>CTRL-EVENT-STARTED-CHANNEL-SWITCH freq=2447 ht_enabled=1 ch_offset=0 ch_width=20 MHz cf1=2447 cf2=0 <3>CTRL-EVENT-ASSOC-REJECT status_code=1 <3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="xxx" auth_failures=2 duration=20 reason=CONN_FAILED <3>CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD <3>CTRL-EVENT-SCAN-STARTED <3>CTRL-EVENT-SCAN-RESULTS <3>CTRL-EVENT-SCAN-STARTED <3>CTRL-EVENT-SSID-REENABLED id=0 ssid="xxx" <3>CTRL-EVENT-SCAN-RESULTS <3>Trying to associate with ec:23:7b:35:b3:f0 (SSID='xxx' freq=2447 MHz) <3>CTRL-EVENT-STARTED-CHANNEL-SWITCH freq=2447 ht_enabled=1 ch_offset=0 ch_width=20 MHz cf1=2447 cf2=0 <3>CTRL-EVENT-ASSOC-REJECT status_code=1 <3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="xxx" auth_failures=3 duration=30 reason=CONN_FAILED <3>CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD <3>CTRL-EVENT-SCAN-STARTED <3>CTRL-EVENT-SCAN-RESULTS

dmesg: dmsg.log

[RinCat]

Did you changed MAC address? dmesg log shows it cannot find adapter by MAC address.

[jezhang2014]

No, I just bought this device, not change any settings, and it works well on windows and my mac...