ribbit-network-frog-hardware
ribbit-network-frog-hardware copied to clipboard
Ribbit-Network
The sensor for the world's largest crowdsourced network of open-source, low-cost, GHG Gas Detection Sensors.
As part of the effort to create an EPS32 based Golioth Frog Sensor https://github.com/Ribbit-Network/ribbit-network-frog-sensor/issues/126 , we need to find and integrate drivers for the Frog Sensors into the ESP-IDF framework...
Opening this issue to improve our sensor hanging features. @muditprotect3d has already started with some great designs that can be incorporated to the sensor! These are posted in issue #163,...
we need to add soldering kit and wire to the list of tools required for the sensor assembly.
Our device will need to store the wifi credentials in a way that they can be saved and reapplied after a device firmware update.
As part of the effort to create an EPS32 based Golioth Frog Sensor https://github.com/Ribbit-Network/ribbit-network-frog-sensor/issues/126 , we need to find and integrate drivers for the Frog Sensors into the ESP-IDF framework...
When loosing the wifi connectivity, reconnect to the Balena AP. the notes in https://github.com/Ribbit-Network/ribbit-network-frog-sensor/blob/main/hardware/v3/assembly-instructions/5-sensor-placement.md suggest to connect to https://192.168.42.1/ -- in my case, I had to connect to http://192.168.42.1/ to...
While guiding @pascaljoly through building his sensor, we encountered an issue where his GPS was not connecting. It turns out that this was an oversight on my part in the...
This [old link](https://www.adafruit.com/product/4463) is out of stock. I got it [here](https://www.amazon.com/SparkFun-Raspberry-Friction-Based-Connector-Soldering/dp/B082J2QYF3/ref=sr_1_1?crid=3FXRZ2WMSC8GN&keywords=SparkFun+Qwiic+or+Stemma+QT+SHIM+for+Raspberry+Pi+%2F+SBC&qid=1662919633&sprefix=sparkfun+qwiic+or+stemma+qt+shim+for+raspberry+pi+%2F+sbc%2Caps%2C179&sr=8-1) on amazon.
While building my frog, I saw in the software section of the setup the GIF of the completed frog. That led me to think I needed to build the frog...
During the recent corporate event for Ribbit, we quickly created this set of [Frog Sensor Instructions on Squarespace](https://www.ribbitnetwork.org/sensor-kit-instruction) which greatly improved the "build a frog sensor" experience. The main benefits:...
Metadata
Owner
Metadata
The sensor for the world's largest crowdsourced network of open-source, low-cost, GHG Gas Detection Sensors.