RflyExpCode icon indicating copy to clipboard operation
RflyExpCode copied to clipboard

Published 20 hours ago • verified publisher icon RflySim

Time_out error

Open pompy001 opened this issue 2 years ago • 1 comments

When i trying to upload the code to the pixhawk this timeout error is coming. Anyone can help me in this !

Loaded firmware for 9,0, size: 1488689 bytes, waiting for the bootloader... If the board does not respond within 1-2 seconds, unplug and re-plug the USB connector. Found board 9,0 bootloader rev 5 on COM4 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff type: ÿÿÿÿ idtype: =FF vid: ffffffff pid: ffffffff coa: //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////8=

sn: 002d00433337510d31303337 chip: 20016419 family: STM32F42x revision: 3 flash 2080768

Erase : [====================] 100.0% Program: [====================] 100.0% Verify : [ ] 1.0% ERROR: timeout waiting for data (4 bytes)

pompy001 avatar Jun 26 '22 07:06 pompy001

Did u solve the problem? What's the solution?

SheldonSEU avatar May 16 '23 06:05 SheldonSEU