proxmark3
proxmark3 copied to clipboard
Published
20 hours ago •
RfidResearchGroup
RfidResearchGroup
"UART:: write time-out" issue when hf reading
Hi!
It's been over 8 months without using the Proxmark. I've downloaded the repository, make, make -j and ./pm3-flash-all and all went good. Now, when I'm trying to scan any mifare card, it returns this error of the title. I'll show you the steps when trying to scan a card with F as all passwords (readed right now with my phone):
└─$ ./pm3
[=] Session log /home/aml/.proxmark3/logs/log_20220921.txt
[+] loaded from JSON file /home/aml/.proxmark3/preferences.json
[=] Using UART port /dev/ttyACM0
[=] Communicating with PM3 over USB-CDC
8888888b. 888b d888 .d8888b.
888 Y88b 8888b d8888 d88P Y88b
888 888 88888b.d88888 .d88P
888 d88P 888Y88888P888 8888"
8888888P" 888 Y888P 888 "Y8b.
888 888 Y8P 888 888 888
888 888 " 888 Y88b d88P
888 888 888 "Y8888P" [ ❄ ]
[ Proxmark3 RFID instrument ]
MCU....... AT91SAM7S512 Rev B
Memory.... 512 Kb ( 59% used )
Client.... Iceman/master/v4.14831-960-gbf143219a 2022-09-21 15:49:53
Bootrom... Iceman/master/v4.14831-960-gbf143219a 2022-09-21 15:49:33
OS........ Iceman/master/v4.14831-960-gbf143219a 2022-09-21 15:50:16
Target.... PM3 GENERIC
[usb] pm3 --> hf mf chk
[#] [ 0] key FF FF FF FF FF FF
[EDITED for not spamming]
[#] [41] key E0 00 00 00 00 00
[=] Start check for keys...
[=] ....[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
.[!!] 🚨 UART:: write time-out
[=] time in checkkeys 80 seconds
[=] testing to read key B...
[+] found keys:
[+] -----+-----+--------------+---+--------------+----
[+] Sec | Blk | key A |res| key B |res
[+] -----+-----+--------------+---+--------------+----
[+] 000 | 003 | ------------ | 0 | ------------ | 0
[+] 001 | 007 | ------------ | 0 | ------------ | 0
[+] 002 | 011 | ------------ | 0 | ------------ | 0
[+] 003 | 015 | ------------ | 0 | ------------ | 0
[+] 004 | 019 | ------------ | 0 | ------------ | 0
[+] 005 | 023 | ------------ | 0 | ------------ | 0
[+] 006 | 027 | ------------ | 0 | ------------ | 0
[+] 007 | 031 | ------------ | 0 | ------------ | 0
[+] 008 | 035 | ------------ | 0 | ------------ | 0
[+] 009 | 039 | ------------ | 0 | ------------ | 0
[+] 010 | 043 | ------------ | 0 | ------------ | 0
[+] 011 | 047 | ------------ | 0 | ------------ | 0
[+] 012 | 051 | ------------ | 0 | ------------ | 0
[+] 013 | 055 | ------------ | 0 | ------------ | 0
[+] 014 | 059 | ------------ | 0 | ------------ | 0
[+] 015 | 063 | ------------ | 0 | ------------ | 0
[+] -----+-----+--------------+---+--------------+----
[+] ( 0:Failed / 1:Success )
[!!] 🚨 UART:: write time-out
[!] ⚠ command execution time out
[usb] pm3 -->
Once it happened, I need to restart both, the Proxmark and the client.
Hw status:
[#] Memory
[#] BigBuf_size............. 42780
[#] Available memory........ 42780
[#] Tracing
[#] tracing ................ 1
[#] traceLen ............... 0
[#] Current FPGA image
[#] mode.................... HF image 2s30vq100 2022-03-23 17:21:16
[#] LF Sampling config
[#] [q] divisor............. 95 ( 125.00 kHz )
[#] [b] bits per sample..... 8
[#] [d] decimation.......... 1
[#] [a] averaging........... yes
[#] [t] trigger threshold... 0
[#] [s] samples to skip..... 0
[#]
[#] LF T55XX config
[#] [r] [a] [b] [c] [d] [e] [f] [g]
[#] mode |start|write|write|write| read|write|write
[#] | gap | gap | 0 | 1 | gap | 2 | 3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) | 31 | 20 | 18 | 50 | 15 | N/A | N/A |
[#] long leading reference | 31 | 20 | 18 | 50 | 15 | N/A | N/A |
[#] leading zero | 31 | 20 | 18 | 40 | 15 | N/A | N/A |
[#] 1 of 4 coding reference | 31 | 20 | 18 | 34 | 15 | 50 | 66 |
[#]
[#] HF 14a config
[#] [a] Anticol override.... std ( follow standard )
[#] [b] BCC override........ std ( follow standard )
[#] [2] CL2 override........ std ( follow standard )
[#] [3] CL3 override........ std ( follow standard )
[#] [r] RATS override....... std ( follow standard )
[#] Transfer Speed
[#] Sending packets to client...
[#] Time elapsed................... 500ms
[#] Bytes transferred.............. 283648
[#] Transfer Speed PM3 -> Client... 567296 bytes/s
[#] Various
[#] Max stack usage......... 4088 / 8480 bytes
[#] Debug log level......... 1 ( error )
[#] ToSendMax............... -1
[#] ToSend BUFFERSIZE....... 2308
[#] Slow clock.............. 31876 Hz
[#] Installed StandAlone Mode
[#] LF HID26 standalone - aka SamyRun (Samy Kamkar)
[#]
Hw tune:
[#] DEBUG: (setClockGrid) clear settings
[=] ---------- Reminder ------------------------
[=] `hw tune` doesn't actively tune your antennas,
[=] it's only informative.
[=] Measuring antenna characteristics, please wait...
🕐 20[#] Got Waiting Time eXtension request 1500 ms
🕛 9[#] Got Waiting Time eXtension request 1500 ms
[=] ---------- LF Antenna ----------
[+] LF antenna: 41,03 V - 125,00 kHz
[+] LF antenna: 28,92 V - 134,83 kHz
[+] LF optimal: 41,59 V - 122,45 kHz
[+] Approx. Q factor (*): 6,2 by frequency bandwidth measurement
[+] Approx. Q factor (*): 12,1 by peak voltage measurement
[!] ⚠ Contradicting measures seem to indicate you're running a PM3GENERIC firmware on a RDV4
[!] ⚠ False positives is possible but please check your setup
[+] LF antenna is OK
[=] ---------- HF Antenna ----------
[+] HF antenna: 28,37 V - 13.56 MHz
[+] Approx. Q factor (*): 8,2 by peak voltage measurement
[+] HF antenna is OK
(*) Q factor must be measured without tag on the antenna
[+] Displaying LF tuning graph. Divisor 88 (blue) is 134,83 kHz, 95 (red) is 125,00 kHz.
Note: Although it says that I have a RDV4, if I install that firmware, the Proxmark bricks and I need to reinstall firmware in bootloader mode (pressing the button).
HF search:
[usb] pm3 --> hf search
🕗 Searching for ISO15693 tag...[#] Got Waiting Time eXtension request 1500 ms
🕛 Searching for LEGIC tag...[#] Got Waiting Time eXtension request 1500 ms
🕓 Searching for ISO14443-B tag...[#] status -1
[#] status -1
[#] status -1
🕕 Searching for FeliCa tag...[#] Got Waiting Time eXtension request 1500 ms
🕗 Searching for TEXKOM tag...[#] Got Waiting Time eXtension request 1500 ms
[#] LF signal properties:
[#] high..........1
[#] low...........1
[#] mean..........1
[#] amplitude.....0
[#] is Noise......Yes
[#] THRESHOLD noise amplitude......8
[#] DEBUG: (setClockGrid) clear settings
[!] ⚠ No known/supported 13.56 MHz tags found
OS: Kali Linux Sudo Make:
Version info: Iceman/master/v4.14831-960-gbf143219a
Platform name: Proxmark3 generic target
PLATFORM: PM3GENERIC
PLATFORM_FPGA: xc2s30
PLATFORM_SIZE: 512
Platform extras: No extra selected
Included options: LF HITAG EM4x50 EM4x70 ZX8211 GENERAL_HF ISO15693 LEGICRF ISO14443b ISO14443a ICLASS FELICA NFCBARCODE HFSNIFF HFPLOT
Standalone mode: LF_SAMYRUN
===================================================================
[*] MAKE client/all
===================================================================
Version info: Iceman/master/v4.14831-960-gbf143219a
Client platform: Linux
GUI support: QT5 found, enabled (Qt version 5.15.4 in /usr/lib/x86_64-linux-gnu)
native BT support: Bluez found, enabled
Jansson library: system library not found, using local library
Lua library: system library not found, using local library
Python3 library: Python3 v3.10 found, enabled
Readline library: enabled
Whereami library: system library not found, using local library
Lua SWIG: wrapper found
Python SWIG: wrapper found
compiler version: cc (Debian 11.3.0-5) 11.3.0
Thanks in advance.
