Ventilator icon indicating copy to clipboard operation
Ventilator copied to clipboard

Published 20 hours ago • verified publisher icon RespiraWorks

Regulator subassembly for v0.4

Open martukas opened this issue 3 years ago • 4 comments
trafficstars

What has to be done Finalize the oxygen pressure regulator sub-assembly for v0.4. Regulator selection is tracked in #952

Probably needs:

  • mounting bracket
  • tube fittings/adapters

martukas avatar Jun 21 '22 19:06 martukas

mounting bracket for the regulator can be found in the datasheet: https://www.smcpneumatics.com/americansmc/SRH/SRH_Series_Regulators.pdf

inceptionev avatar Oct 18 '22 18:10 inceptionev

Requires 2x of these adapters for tubing: https://www.mcmaster.com/5225K715/

martukas avatar Apr 23 '23 09:04 martukas

Does the exhaust port need to be routed somewhere or plugged with provided plug?

martukas avatar Apr 23 '23 09:04 martukas

Plug was included with regulator. I have installed it. Not sure if it's needed in CAD.

martukas avatar May 23 '23 18:05 martukas