python 3 compatibility patch

[elliotclee]

workfeature-python3.zip

[Rentlau]

thank a lot

[Rentlau]

But you gave me the patch for the WorkFeature-WB (workbench) not for the WorkFeature Macro. For your information the WorkFeature-WB is now fully compatible with py3 and get some improvement in the WorkFeature-WB repository, branch2019_01: https://github.com/Rentlau/WorkFeature-WB/tree/release2019_01

[elliotclee]

Sorry and sorry. I just made the patch against whatever the add-ons manager pulled. Maybe FreeCAD 0.18dev needs to be fixed to pull from the right WorkFeature-WB branch.

On Thu, Mar 7, 2019, 2:02 AM Laurent [email protected] wrote:

But you gave me the patch for the WorkFeature-WB (workbench) not for the WorkFeature Macro. For your information the WorkFeature-WB is now fully compatible with py3 and get some improvement in the WorkFeature-WB repository, branch2019_01: https://github.com/Rentlau/WorkFeature-WB/tree/release2019_01 http://url

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Rentlau/WorkFeature/issues/25#issuecomment-470410475, or mute the thread https://github.com/notifications/unsubscribe-auth/AltoFGfhHl_0mvlqa7wnDRcf_EK7RKl0ks5vULl0gaJpZM4bORG1 .

[PavelKalina]

Hi, it does not work with 0.18.0 or 0.19_pre on x64 WIN10 It worked with 0.17

Pavel

[Rentlau]

Now it must work with py3 and QT5 FreeCAD version. Let me know

[PavelKalina]

Installed in fresh FreeCAD-0.18.16110.f7dccfa-WIN-x64-installer.exe on WIN10 Ent. 64b ver 1703

Addon manager: Gitphyton not found. Using standard download instead. Installed in: AppData\Roaming\FreeCAD\Mod\workfeature-macro
AppData\Roaming\FreeCAD\Macro\start_WF.FCMacro (start_WF.FCMacro has size 0) Afer reboot Macro found in macro menu but: „Err: cannot load FreeCAD WorkFeature macro path ! Chech the install!“

When content of workfeature-macro is DIR moved to macro dir. It works.

Thanks!