Rem0o
Fan Control Initialization Failed
The Fan Control has worked fine for the past 8 weeks. I sent you a payment of $20.00 after the last update fixed an issue of the 2 case fans being uncontrolable. After waking Win10 up I have to manually launch the fan program, not a big deal. On May 30 it would not initialize per the Windows error screen. I deleted the program files, downloaded the latest version, unzipped into an empty folder and it won't open in Win10 Pro 64-bit. BTW my Win10 is stuck at 21H1 and crashes every time it tries to update past that. Renders my PC unbootable after each attempt. Since a major update last July the CPU fan only runs at idle speed. This causes my CPU to overheat. Prior to that update it was stuck at full speed and sounded like a hair dryer running. Windows 10 I believe is not virtualizing my older BIOS properly, at least the fan control part. Your program was a good band aid fix to force speed-up of the CPU fan and two case fans to prevent overheating. I am retired and can't afford a newer system. I built this one in 2015.
System Info:
Processor AMD FX-8350
Installed RAM 16.0 GB
Item type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
Edition Windows 10 Pro
Version 21H1
Installed on 2/12/2022 (Updated manually).
OS build 19043.1645
Experience Windows Feature Experience Pack 120.2212.4170.0
Motherboard: Manufacturer Gigabyte Technology Co. Ltd. Model 990FXA-UD3 Version x.x Chipset Vendor AMD Chipset Model RD9x0 Chipset Revision 02 Southbridge Vendor AMD Southbridge Model SB910/950 Southbridge Revision 40 System Temperature 88 °F BIOS Brand American Megatrends Inc. Version F3 (No updates available from Gigabyte). Date 5/28/2015 Cores 8 Threads 8 Name AMD FX-8350 Code Name Vishera Package Socket AM3+ (942) Technology 32nm Specification AMD FX-8350 Eight-Core Processor Family F Extended Family 15 Model 2 Extended Model 2 Stepping 0 Revision OR-C0 Instructions MMX (+), SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, SSE4A, AMD 64, NX, VMX, AES, AVX, FMA3, FMA4 Virtualization Supported, Disabled Hyperthreading Not supported CPU Fan Speed 2556 RPM Rated Bus Speed 2611.5 MHz Stock Core Speed 4000 MHz Stock Bus Speed 200 MHz Average Temperature 66 °F (Not accurate) My room temp is around 72°F. so not possible.
Here is the log.txt file. log.txt
FanControl is stuck at initializing your hard drive detection. You should remove the storage detection:
FanControl is stuck at initializing your hard drive detection. You should remove the storage detection:
Ver118 , win 11 find a problem almost like that, run exe,alert no tip,when I change guide mode(nsconfig),enter the safeMode ， I get a alertView about “exception processing Message 0xc0000005 - Unexpected parameters”,
btw,能 中文交流吗。。。 好累
