Fan Control not Working After Pc Sleep Mode

[Audipower]

Hello First i will say Fan Control is Great Software Thanks for That

But i Have 1 Problem afer the Pc goes to Sleep the Controls of the Onboard Fans Stop Working CPU Fan and Fan 2 for the Case fans. Fan 2 ist Extended to a Fan Hub ( Aero Cool P7 - S1 ). This Device Use the PWM Signal from Fan 2 ( Asus Prime B350 - Plus ) and distribute the PWM Signal to the 5 Fans in the Case. All This Works Fine after a Pc restart. Only after Sleep the Control does Nothing restart the Software dosent Help only Pc Restart

I Have no Errors in the Log and i use Win 10 Pro Thanks for your Help and Great Work from Germany

[Rem0o]

What kind of sleep? S0? S1? S2?

[NatasKrad]

Similar issue here after sleep. (S4) I get the attached LibreHardwareMonitor error after coming out of sleep. Thanks

[Rem0o]

@NatasKrad In your case, it failed once, retried, and succeeded, since the control cards are there. The popup is the first time it failed.

[Audipower]

Its S4 As i Said i have no Error or Something it Looks like Fan Control works Fine but it Makes no Changes and the Control from the Mainbord is Working. I can see it on the data from the CPU Fan Mainbord minimum is 600~ RPM when Fan Control Works it gets down to 320~ RPM

Restarting Fan Control doesn't help only Complete restart fix it

[NatasKrad]

@Rem0o Thanks for the reply. So is it safe to ignore?

[Rem0o]

Added a multi-retry mechanism since, until all sensors are back.

[otDan]

it seems that this is still an issue with the latest version, it fails, loads in the cards for the fans but the sensors are not updating and the fans aren't controlled by fan control anymore. trying to refresh the sensors just makes it refresh indefinitely, restarting the app doesn't work either even if I close the process and start up a new one, to make it work again I have to reboot

[FireDragon761138]

I have the same problem. Fan Control fails to control the fans after waking from sleep.