FanControl.Releases icon indicating copy to clipboard operation
FanControl.Releases copied to clipboard
verified publisher icon Rem0o

The Run minimized option does not work.

Open Draken69CZ opened this issue 2 months ago • 12 comments

Hello, I have set it to run minimized, but it is ignored and the program starts normally. It has been like this for a long time, and there have been at least two updates in the meantime. I currently have V245. Thank you.

Draken69CZ avatar Oct 20 '25 16:10 Draken69CZ

You're gonna have to give more details.

  1. Do you mean upon startup automatically when you boot up?
  2. Do you get a popup message in the software when the window comes up?
  3. If you exit the software and open it back up with the icon, is the setting respected?

Rem0o avatar Oct 20 '25 17:10 Rem0o

After Windows starts, no popup message Image

The settings are retained and the program starts minimized after manual launch. Image

Draken69CZ avatar Oct 20 '25 18:10 Draken69CZ

Any logs.txt?

Rem0o avatar Oct 20 '25 18:10 Rem0o

Last log entry 04.10.2025 10:39:03: LibreHardwareMonitor failed and was stopped. Refresh (CTRL+R) to attempt to restart it.

Draken69CZ avatar Oct 20 '25 18:10 Draken69CZ

Can I get the whole log? Also what version of the software (.net 4.8 or .net 8) are you running? I will make a test build with added logs to see exactly what is causing the window to pop up.

Rem0o avatar Oct 20 '25 18:10 Rem0o

Image

log.txt

Draken69CZ avatar Oct 20 '25 18:10 Draken69CZ

Image

Rem0o avatar Oct 20 '25 19:10 Rem0o

net48.zip

net8.zip

Swap the dlls of the right zip depending on your installation. Then reproduce the issue where the window popup at startup. Ideally tell me the time so it's then easier to spot in the logs.

Rem0o avatar Oct 20 '25 19:10 Rem0o

10/20/2025 10:39:38 PM: [DEBUG] Pending dialog 1 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel 10/20/2025 10:39:38 PM: [DEBUG] Pending dialog 2 from AsyncTaskMethodBuilder1-Start: ProgressDialog - ProgressViewModel 10/20/2025 10:39:38 PM: [DEBUG] Dialog closed 2 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel 20.10.2025 22:39:43: [DEBUG] Pending dialog 2 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel 20.10.2025 22:39:52: [DEBUG] Pending dialog 3 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel 20.10.2025 22:40:00: [DEBUG] Pending dialog 4 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel 20.10.2025 22:40:10: [DEBUG] Pending dialog 5 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel 10/20/2025 10:40:19 PM: [DEBUG] Dialog closed 5 from AsyncTaskMethodBuilder1-Start: ProgressDialog - ProgressViewModel 20.10.2025 22:40:19: [DEBUG] Dialog closed 4 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel 10/20/2025 10:40:19 PM: [DEBUG] THERE IS A PENDING DIALOG WHILE BOOTSTRAPPING. 20.10.2025 22:40:20: [DEBUG] Dialog closed 3 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel 20.10.2025 22:40:20: [DEBUG] Dialog closed 2 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel 20.10.2025 22:40:20: [DEBUG] Dialog closed 1 from AsyncTaskMethodBuilder1-Start: MessageDialog - MessageViewModel

Draken69CZ avatar Oct 20 '25 20:10 Draken69CZ

In release mode it's trickier than I thought. Here's an updated build with the content of the messages/dialogs in the logs.

net48.zip net8.zip

Rem0o avatar Oct 20 '25 21:10 Rem0o

10/21/2025 4:40:42 PM: [DEBUG] Pending dialog 1: MessageDialog - MessageViewModel - Error These errors occurred while restoring the configuration:

• Missing control sensor: /lpc/nct6798d/control/1 - CPU • Missing control sensor: /lpc/nct6798d/control/2 - Přední • Missing control sensor: /lpc/nct6798d/control/0 - Zadní • Missing control sensor: /lpc/nct6798d/control/3 - Fan Control #4 • Missing control sensor: /lpc/nct6798d/control/4 - Fan Control #5 • Missing control sensor: /lpc/nct6798d/control/5 - Fan Control #6 • Missing control sensor: /lpc/nct6798d/control/6 - Fan Control #7 • Missing speed sensor: /lpc/nct6798d/fan/1 - CPU • Missing speed sensor: /lpc/nct6798d/fan/3 - Přední • Missing speed sensor: /lpc/nct6798d/fan/0 - Zadní • Missing speed sensor: /lpc/nct6798d/fan/2 - Přední • Missing speed sensor: /lpc/nct6798d/fan/4 - Fan #5 • Missing speed sensor: /lpc/nct6798d/fan/5 - Fan #6 • Missing speed sensor: /lpc/nct6798d/fan/6 - Fan #7

if this error occurs upon startup, try increasing your startup delay. 10/21/2025 4:40:43 PM: [DEBUG] Pending dialog 2: ProgressDialog - ProgressViewModel 10/21/2025 4:40:43 PM: [DEBUG] Dialog closed 2 21.10.2025 16:40:47: [DEBUG] Pending dialog 2: MessageDialog - MessageViewModel - Error These errors occurred while restoring the configuration:

• Missing control sensor: /lpc/nct6798d/control/1 - CPU • Missing control sensor: /lpc/nct6798d/control/2 - Přední • Missing control sensor: /lpc/nct6798d/control/0 - Zadní • Missing control sensor: /lpc/nct6798d/control/3 - Fan Control #4 • Missing control sensor: /lpc/nct6798d/control/4 - Fan Control #5 • Missing control sensor: /lpc/nct6798d/control/5 - Fan Control #6 • Missing control sensor: /lpc/nct6798d/control/6 - Fan Control #7 • Missing speed sensor: /lpc/nct6798d/fan/1 - CPU • Missing speed sensor: /lpc/nct6798d/fan/3 - Přední • Missing speed sensor: /lpc/nct6798d/fan/0 - Zadní • Missing speed sensor: /lpc/nct6798d/fan/2 - Přední • Missing speed sensor: /lpc/nct6798d/fan/4 - Fan #5 • Missing speed sensor: /lpc/nct6798d/fan/5 - Fan #6 • Missing speed sensor: /lpc/nct6798d/fan/6 - Fan #7

if this error occurs upon startup, try increasing your startup delay. 21.10.2025 16:40:56: [DEBUG] Pending dialog 3: MessageDialog - MessageViewModel - Error These errors occurred while restoring the configuration:

• Missing control sensor: /lpc/nct6798d/control/1 - CPU • Missing control sensor: /lpc/nct6798d/control/2 - Přední • Missing control sensor: /lpc/nct6798d/control/0 - Zadní • Missing control sensor: /lpc/nct6798d/control/3 - Fan Control #4 • Missing control sensor: /lpc/nct6798d/control/4 - Fan Control #5 • Missing control sensor: /lpc/nct6798d/control/5 - Fan Control #6 • Missing control sensor: /lpc/nct6798d/control/6 - Fan Control #7 • Missing speed sensor: /lpc/nct6798d/fan/1 - CPU • Missing speed sensor: /lpc/nct6798d/fan/3 - Přední • Missing speed sensor: /lpc/nct6798d/fan/0 - Zadní • Missing speed sensor: /lpc/nct6798d/fan/2 - Přední • Missing speed sensor: /lpc/nct6798d/fan/4 - Fan #5 • Missing speed sensor: /lpc/nct6798d/fan/5 - Fan #6 • Missing speed sensor: /lpc/nct6798d/fan/6 - Fan #7

if this error occurs upon startup, try increasing your startup delay. 21.10.2025 16:41:05: [DEBUG] Pending dialog 4: MessageDialog - MessageViewModel - Error These errors occurred while restoring the configuration:

• Missing control sensor: /lpc/nct6798d/control/1 - CPU • Missing control sensor: /lpc/nct6798d/control/2 - Přední • Missing control sensor: /lpc/nct6798d/control/0 - Zadní • Missing control sensor: /lpc/nct6798d/control/3 - Fan Control #4 • Missing control sensor: /lpc/nct6798d/control/4 - Fan Control #5 • Missing control sensor: /lpc/nct6798d/control/5 - Fan Control #6 • Missing control sensor: /lpc/nct6798d/control/6 - Fan Control #7 • Missing speed sensor: /lpc/nct6798d/fan/1 - CPU • Missing speed sensor: /lpc/nct6798d/fan/3 - Přední • Missing speed sensor: /lpc/nct6798d/fan/0 - Zadní • Missing speed sensor: /lpc/nct6798d/fan/2 - Přední • Missing speed sensor: /lpc/nct6798d/fan/4 - Fan #5 • Missing speed sensor: /lpc/nct6798d/fan/5 - Fan #6 • Missing speed sensor: /lpc/nct6798d/fan/6 - Fan #7

if this error occurs upon startup, try increasing your startup delay. 21.10.2025 16:41:13: [DEBUG] Pending dialog 5: MessageDialog - MessageViewModel - Error These errors occurred while restoring the configuration:

• Missing control sensor: /lpc/nct6798d/control/1 - CPU • Missing control sensor: /lpc/nct6798d/control/2 - Přední • Missing control sensor: /lpc/nct6798d/control/0 - Zadní • Missing control sensor: /lpc/nct6798d/control/3 - Fan Control #4 • Missing control sensor: /lpc/nct6798d/control/4 - Fan Control #5 • Missing control sensor: /lpc/nct6798d/control/5 - Fan Control #6 • Missing control sensor: /lpc/nct6798d/control/6 - Fan Control #7 • Missing speed sensor: /lpc/nct6798d/fan/1 - CPU • Missing speed sensor: /lpc/nct6798d/fan/3 - Přední • Missing speed sensor: /lpc/nct6798d/fan/0 - Zadní • Missing speed sensor: /lpc/nct6798d/fan/2 - Přední • Missing speed sensor: /lpc/nct6798d/fan/4 - Fan #5 • Missing speed sensor: /lpc/nct6798d/fan/5 - Fan #6 • Missing speed sensor: /lpc/nct6798d/fan/6 - Fan #7

if this error occurs upon startup, try increasing your startup delay. 10/21/2025 4:41:23 PM: [DEBUG] Dialog closed 5 21.10.2025 16:41:23: [DEBUG] Dialog closed 4 10/21/2025 4:41:23 PM: [DEBUG] THERE IS A PENDING DIALOG WHILE BOOTSTRAPPING. 21.10.2025 16:41:24: [DEBUG] Dialog closed 3 21.10.2025 16:41:24: [DEBUG] Dialog closed 2 21.10.2025 16:41:24: [DEBUG] Dialog closed 1

Draken69CZ avatar Oct 21 '25 14:10 Draken69CZ

Image

Draken69CZ avatar Oct 21 '25 14:10 Draken69CZ