Fans do not start

[mikeg-de]

Since recently I noticed my fans (intake and exhaust) are repeatedly ramping up then coming to complete halt causing quite annoying "whining". I tampered with the settings to keep both intake and exhaust running with slightly positive pressure (offset).

That approach worked fine a few version before, when the old driver was still used. Now, with the following settings, my intake fans struggle to start.

After I set the ofset to 20 % for the intake and reduced it back to 15%, they keep spinning. I use, for intake and exhaust, each three bequiet silent wings pro 4. On the exhaust, one fan ocassionaly stops spinning while the others keep running. All fans are wired the exact same way using a 3-way splitter.

[Rem0o]

Redo a full calibration from the wrench icon.