Nvidia GPU Fans dont go back under 30% speed

[Geronimoo03]

Hi everyone, I have a problem with my GPU fans. I would like to set them permanently to 0 percent, as I have installed Noctua fans under my GPU and control them with the temperature of the GPU. Now to the problem: After I start my PC, the fans of my graphics card run at 0 percent. Then when my graphics card gets a little warmer, the fans start spinning (at the minimum of 30 percent). However, when the GPU cools down again, the fans stay at 30 percent and do not go back down to 0 percent. I have enabled “Nvidia 0% hardware curve override” and disabled “Force apply”. Does anyone here have a solution?

[Nightblade]

Have you read this? https://github.com/Rem0o/FanControl.Releases/wiki/Nvidia-30%25-and-0-RPM

[Geronimoo03]

Have you read this? https://github.com/Rem0o/FanControl.Releases/wiki/Nvidia-30%25-and-0-RPM

Yeah, I already read this but this didnt fix my problem

[Synapse07]

Hi, just got a 3070ti FE today, never used fan control before. can i see how youve setup the curves so i can try and see if fan stop works for me or not? cropped screenshots would be great. thanks.

[MaxTKB]

Yeah I'm having this same issue with V221, it was working on V220 but after updating it appears that it is no longer able to go below 30%. For reference I have a 3070. Actually, literally as I'm typing this it randomly fixed itself and is now going below 30. Weird. It was a recurring issue for a bit though.

Edit: after a short amount of time, it the issue has come back and is persisting

[Rem0o]

FanControl doesn't control anything that happens below 30.