[ReactorCraft] Turbine generator unable to use power from high pressure turbine

[Konrad-Wszelaki]

Hi,

I've encountered an issue when trying to use a turbine generator connected to a high pressure turbine. I can get all the multiblocks to form correctly and have enough steam to run the HP turbine continuously, but despite the turbine spinning at full power and the generator being in seemingly the right place, no power is being transmitted to the generator.

The exact situation is as follows:

• full-size, HP turbine facing west, with the turbine generator structure starting immediately where the turbine ends
• turbine generator is formed first, since the block I have to place last is the one that is touching the turbine. It forms with seemingly no issue.
• Last stage of the turbine is formed immediately afterwards, facing the right way and forming without issue.
• I disable the redstone signal that keeps the turbine from spinning, at which point it begins to consume steam and spins up, working correctly.
• turbine generator does not go spinny spinny. Angular transducer says that the generator receives power from [NONE], so it obviously does not see the turbine.

I have a different turbine generator connected to a LP turbine and it works without any issues.

Since this issue causes no crashes I do not have any obvious log files to include, but if there is anything beyond the description seen above that I can provide just let me know.