Any help connecting xmrig directly ?

[Jahzwolf]

I have xmrig running hitting unmineable pool making fractional ravencoin. I want to point it at my full node. It is not fully synced so I am hoping that is the reason I get end of file errors. Anyone done this ?

./xmrig -o 127.0.0.1:8767 -a rx/0 -u RWdWHUVkJrEHL6VCA6FV1m15ajufzjmTei

• ABOUT XMRig/6.17.0 gcc/5.4.0
• LIBS libuv/1.43.0 OpenSSL/1.1.1m hwloc/2.7.0
• HUGE PAGES supported
• 1GB PAGES disabled
• CPU DO-Premium-Intel (1) 64-bit AES VM L2:8.0 MB L3:0.0 MB 2C/2T NUMA:1
• MEMORY 2.3/3.6 GB (64%) DIMM 0: 4 GB RAM @ 0 MHz (null)
• MOTHERBOARD DigitalOcean - Droplet
• DONATE 1%
• ASSEMBLY auto:intel
• POOL #1 127.0.0.1:8767 algo rx/0
• COMMANDS hashrate, pause, resume, results, connection
• OPENCL disabled
• CUDA disabled [2022-05-15 13:01:43.288] net 127.0.0.1:8767 read error: "end of file" [2022-05-15 13

[Jahzwolf]

Still no miner able to Mine directly to a Core Node Apparently a Stratum Server is necessary.

Yikes seems like a low hash miner needs to be directly on the node to stand a chance

[Seal-Clubber]

No tests were done on it with xmrig, but give this a try: ravencoin-stratum-proxy, please share your config setup if you get it to work :D

[corviato1]

@Jahzwolf if you are mining to your own node, try adding this to the config(raven.conf): server=1

To enable CPU mining (not recommended) gen=1: genproclimit=-1:

• The first line tells the wallet to start generating (or mining) upon launch
• The second line sets the number of processor threads to be used for mining. A value of -1 means to use all available processor threads.

You also may need to configure the port in your router.