Ralim
Bootloop on 2.23
Device: Miniware TS101
Bootloader (DFU): 1.05
Official FW working: 2.04 → 2.11
IronOS 2.22: Works fine
IronOS 2.23: Bootloop (screen shows logo, then resets continuously)
Steps to reproduce:
- Enter DFU mode (DFU 1.05)
- Flash TS101 2.23 .hex
- Reboot → device keeps restarting
Expected behavior:
Firmware should boot normally as with 2.22.
Additional info:
Tested with different cables and PCs. Reverting to 2.22 fixes the issue.
I have the same condition and infinite reboot occurs. When I remove the tip and plug it in, it boots normally, but when I install the tip and boot, an infinite reboot occurs.
When I tested it, when I connected it to the UGREEN 100w adapter (5v=3a, 9v=3a, 12v=3a, 15v=3a, 20v=5a), I got an infinite boot symptom, When I connected it to the Baseus Blade 100w 20000mah, it worked fine.
Infinite boot also occurs with baseus gan 65w adapter (5v=3a, 9v=3a, 12v=3a, 15v=3a, 20v=3.25a)
The same thing happens on my TS101. It works fine with a Lenovo 65W charger, however it does not with a Baseus Power Strip. I will check what protocols the chargers support later today :)
It works fine on this Lenovo charger:
And it does not on this Baseus one:
(This measurement was made with a cable without an e-Marker, hence the 60W limit)
I can provide additional info or try to sniff the PD traffic if that would help in fixing the issue :)