Ralim
Pinecill V2 does not boot on the Baseus 100W GaN power adapter
Describe the bug
Pinecill V2 does not boot on the Baseus 100W GaN power adapter
When trying to connect the device via the Baseus 100W GaN power supply (https://sl.aliexpress.ru/p?key=EA8n32s), the Pinencil screen remains black. The same thing happens when trying to boot the device in debug mode by holding down the plus button while plugged in. The power supply works fine with other devices. Pinencil also works fine when powered from another charger and boots normally when powered from the USB C port on a PC
Details of your device:
- Device: Pinecil V2
- Release: 2.23E.3D331AA0
- Power adapter being used: https://sl.aliexpress.ru/p?key=EA8n32s
What cable are you using, can you tested other high power PD devices?
Have you read through the debugging USB-PD docs?
The screen being entirely black suggests either the the PD CC pin pulldowns are not working with this supply (These are integral to the FUSB302, not under software control until about a second after boot). Or that this supply does something that doesnt play well with the PD stack.
