Pinecil debug menu reports incorrect power mode

[wolfpackmars2]

Describe the bug When connected to PD power source, iron reports "PWR QC" in debug menu. Everything else works as expected. The i

To Reproduce Steps to reproduce the behavior:

1. Start iron while holding + to enter PD Debug
2. Notice that PD Debug reports iron has negotiated PD 20v successfully
3. Exit PD Debug and go to normal debug menu (Long press B- from main screen)
4. Click on A+ button until "PWR QC" is displayed

Expected behavior Debug menu should display "PWR PD No VBus" or just "PD No VBus"

Details of your device:

• Device: Pinecil V2
• Release: V2.18.A1A569A (17-07-22) and V2.20.0DDBE80 (25-09-22)
• Power adapter being used: Anker 737

Additional context Using new Anker 737 power bank [https://www.amazon.com/dp/B09VPHVT2Z] Using new Anker 3.3' USB-C 100w cable [https://www.amazon.com/dp/B093GGVB89] New Pinecil V2 [https://www.amazon.com/dp/B096X6SG13]

It is noted that iron performs as expected. It reports 20v, it operates at PD spec, the PD Debug menu shows the correct information, the iron quickly negotiates the PD mode. The ONLY problem is the regulard debug menu reports "PWR QC".

Have a different USB cable [https://www.amazon.com/gp/product/B09PB8DJ28] ordered, will update if it performs differently.