IronOS
IronOS copied to clipboard
Ralim
mhp30 not using qc3
when connecting the mhp30 with a usbc to usba cable i get only 5v, 3w. seems there issomething missing for qc3.
Describe the bug
To Reproduce
Expected behavior
Details of your device:
- Device: mhp30
- Release: 2.19
- Power adapter being used: 100W usb power supply with usbc pd2, pd3 and usba qc2, qc3 ports, running both ports with max. 20V 5A. power module supplied with 24V 5A. also tested with 60W power supply.
- If this is an accelerometer related issue, please include its model number here:
Additional context
Please fill in the missing details to help the developer finding the cause.
- Device: [e.g. TS80/Pinecil etc]
- Release: [eg 2.15.40087E6]
- Power adapter being used:
- If this is an accelerometer related issue, please include its model number here:
MHP30 is missing QC support, and is only designed for PD support to the best of my knowledge. The unit I have here at least, does not have the required hardware for QC negotiation. Nor have I seen a QC3 port capable of 20V5A (yet).
MHP30 is missing QC support, and is only designed for PD support to the best of my knowledge. The unit I have here at least, does not have the required hardware for QC negotiation. Nor have I seen a QC3 port capable of 20V5A (yet).
And never will I think. You can't transfer 100w of power with random usb cable, so there is a reason why Qualcomm adopted PD standart as a base for QC4. Cables with id chips.
okay, i may have made a typo at the usb-a capabilities. but even my 6 year old phone is able to draw 1.5A at 12V over that connection
Yes, but 18W is not very much power compared to the 60W the MHP30 is designed for.
@wildblue Arguing back an forth will not change the hardware! Since this is clearly no software related issue please close it! 😊
Thanks
i know. normally issues do not get closed by me. i woyld have done that after getting the information that the mhp30s hardware is not capable of running on a normal usb power supply.
i am quite confident to have read in the documentation of iron os that it supports qc2, and qc3. you may have to document that (not) feature of ironos different to avoide making other people having the same (non) issue with the software.
and at this moment a had closed this issue, but with the original firmware my device is not throtteled at 5V 3W. How do i fix that misbehaviour of my hardware with ironos?