RT-Thread
fix(klibc\kstdio): vsnprinf size_t can not exceed INT32_MAX, don't u…
…se (rt_size_t -1)
拉取/合并请求描述：(PR description)
[
开启RT_KLIBC_USING_LIBC_VSNPRINTF后，rt_vsprintf 执行异常。排查原因为 vsnprinf 的 size 参数不能超过 INT32 最大值。
编译器
arm-none-eabi-gcc v10.3.1
mcu
stm32h7xx
]
当前拉取/合并请求的状态 Intent for your PR
必须选择一项 Choose one (Mandatory):
- [ ] 本拉取/合并请求是一个草稿版本 This PR is for a code-review and is intended to get feedback
- [x] 本拉取/合并请求是一个成熟版本 This PR is mature, and ready to be integrated into the repo
代码质量 Code Quality：
我在这个拉取/合并请求中已经考虑了 As part of this pull request, I've considered the following:
- [x] 已经仔细查看过代码改动的对比 Already check the difference between PR and old code
- [x] 代码风格正确，包括缩进空格，命名及其他风格 Style guide is adhered to, including spacing, naming and other styles
- [x] 没有垃圾代码，代码尽量精简，不包含
#if 0代码，不包含已经被注释了的代码 All redundant code is removed and cleaned up - [x] 所有变更均有原因及合理的，并且不会影响到其他软件组件代码或BSP All modifications are justified and not affect other components or BSP
- [x] 对难懂代码均提供对应的注释 I've commented appropriately where code is tricky
- [x] 代码是高质量的 Code in this PR is of high quality
- [x] 已经使用formatting 等源码格式化工具确保格式符合RT-Thread代码规范 This PR complies with RT-Thread code specification
- [x] 如果是新增bsp, 已经添加ci检查到.github/workflows/bsp_buildings.yml 详细请参考链接BSP自查
rt_vsprintf
可否具体讲讲复现方法吗？这边ci检测看起来没有报warning。 https://github.com/RT-Thread/rt-thread/actions/runs/14599436945/job/40953639237
rt_vsprintf
可否具体讲讲复现方法吗？这边ci检测看起来没有报warning。 https://github.com/RT-Thread/rt-thread/actions/runs/14599436945/job/40953639237
或者也可以把报错截图发出来
rt_vsprintf
可否具体讲讲复现方法吗？这边ci检测看起来没有报warning。 https://github.com/RT-Thread/rt-thread/actions/runs/14599436945/job/40953639237
或者也可以把报错截图发出来
需要使能使用 libc的 vsnprintf
