BUG: DX4600

[vysecurity]

Please fill in the following information.

Install ENV: (You can find it in the boot interface.)

• DMI: UGREEN DX4600/To be filled by O.E.M, BIOS 5.19 12/21/2022
• CPU: Intel(R) Celeron(R) N5105 @ 2.00GHz
• NIC: (pid & vid)

RR version: (You can find it in the update menu.)

• RR: RR v25.1.4
• addons: all
• modules: all
• lkms: all

DSM:

• model: 7.2
• version: Latset

Issue:

I'm trying to get it installed on a USB to boot into a DX4600. I had TCRP previously with DSM, so it was working fine, but I need to use RR to restore and install the bootloader for DSM so I can get back in. It detected fine (I can also access the web UI for RR), and I built the bootloader. Then, when accessing the bootloader, the DSM boots, but there is no IP address shown for DSM. It means there's no way to access the DSM instance.

The HDMI says: interface not operational. Wait a few minutes. Find DSM via HTTP://find.synology.com/ or Synology Assist.

I think there's no driver for network?

In RR, it connected to eth1(igc) IP address fine, but after it boots into DSM it doesn't detect network.

Thank you in advance for your help and comments.

[wjz304]

N5105 建议安装 SA6400，其他型号尝试切换为直接驱动

[vysecurity]

我也试了但是好像验证不到网卡

[wjz304]

一般情况下， 这都不是网卡的问题。 内核崩溃在没有串口情况下很难调查。

翻译看看吧 https://rrorg.cn/archives/issues

[vysecurity]

Oh ok, I get it. So it's likely a kernel crash. I'm just confused why it crashes because TCRP worked.

[wjz304]

因为 RR 和 TCRP 的 base 新系统不一样，这在 kexec 时导致一些内存差别， 所以 我说 尝试切换为直接驱动，这将屏蔽 这些差别。

[wjz304]

test https://github.com/RROrg/rr-build/actions/runs/13432156435

[vysecurity]

This is 404. Not found. :( https://github.com/RROrg/rr-build/actions/runs/13432156435