Protonerd
Low volume with 8Ohm 2W speaker volume control does not seem to work.
Hi
Yes I tried that but can not hear or see any difference when I try.
Do I need a resister between the dfplayer and the ardiuno the rest is all working :)
Thank you for your time on this
Regards,
Dan
On Sun, Feb 7, 2021 at 16:29 András Kun [email protected] wrote:
Have you tried to set the volume in the config menu?
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Protonerd/FX-BlasterOS/issues/5#issuecomment-774627140, or unsubscribe https://github.com/notifications/unsubscribe-auth/ASYG3H366OFYLDEPYUCU2XDS5Y6MZANCNFSM4XG57SHA .
No resistor is needed. However there is a chance you have a bad DFPlayer (or a fake one, whcih amounts to the same). What does the marking on the DFPlayer chips read?
You can try to modify the line #334 or FX-BlasterOS.ino from Set_Volume(storage.volume); to Set_Volume(31);
If still low volume, either speaker or DFPlayer is defect.