I have trouble with Arduino Portenta X8

[tolgahayit]

Hi all, I am able to make connection between Arduino sketch and linux right now. But I have another problem. I bought ProtoCentral MAX86150 PPG and ECG breakout about 3 moths ago, I tried to connect that sensor with Portenta X8 but couldn't. And I also dropped my setup below. I use I2C protocol (Black cable to GND, Blue cable to SDA, Yellow cable to SCL and Red cable to VCC) I think there is no signal from the sensor.

I followed this example: https://docs.arduino.cc/tutorials/portenta-x8/python-arduino-data-exchange/#communication-between-linux-and-arduino-sketches

I appreciated if any suggestions.

Thanks