protocentral_healthypi_v4
protocentral_healthypi_v4 copied to clipboard
Protocentral
HealthyPi v4 is a fully open source, standalone vital signs monitor with wireless and wearable capabilities.
Similar to https://github.com/Protocentral/protocentral_healthypi_v4/issues/16 I am trying to read out the data in Python. I have been using https://github.com/jackyko1991/HealthyPi-Python-Interface, which adheres to v3 packet format (https://healthypi3.protocentral.com/#streaming-packet-format). Can you please please give...
Hi there, I've just received my complete Healthypi V4 kit and I'm trying to access the data coming in via the serial port on the raspberry pi. I'm trying to...
Looking at v3, there's documentation for MQTT as well as it being present in the GUI and the gui.java code, but it is missing in the v4 GUI and is...
Hello, In the firmware I saw that the ECG sampling frequency is initialized to 125 SPS .. this is very low (the lowest the SoC is capable of), even too...
Changed default serial port from /dev/ttyAMA0 to /dev/serial0 for pi4 support. Currently UNTESTED on Pi3, will test shortly.
I've tried multiple modes (v3, BLE, and WiFi AP), and up till this point, I can only get readings from the WiFi AP mode. According to the documentation, in v3...
Hi Recently purchased a HealthyPi 4.4 and I am not receiving any data. I tried the following (1) using it as RPi4 HAT, the GUI shows up but with no...
Buster on the Pi4, fully patched. Touch screen is working. When I do the cURL to get the install script (or even when I download the full Git repo and...
Under section Getting started with the HealthyPi GUI on Windows, MacOS and Linux / Step 3 : Upload the Processing code from PC to Raspberry Pi. Connection refused error may...
How can you calculate integer value?? I want to use bandpass filter 2~40Hz
Metadata
Owner
Metadata
HealthyPi v4 is a fully open source, standalone vital signs monitor with wireless and wearable capabilities.