Micron

Micron copied to clipboard

Finn2708

hartk1213

Direct access to Micron_CAD_Assembly.step instead of zip file

3

Hi, We are using an addon for fusion360 called Voron-Construct ( https://github.com/PrintersForAnts/Voron-Construct) The addon gives us acces to step files to use in fusion. The printer files are ziped and...

izanamisu

Only `z_tensioner_a` inclunded in repo STLs

5

In the CAD there's `z_tensioner_a` to accompany `z_tensioner_bracket_a`, and likewise for B, but `STLs/Z_Idlers/[a]_z_tensioner_x4.stl` is only the A variant, so unless you know to mirror two of them for printing...

DonutCables

Gap between the "in part" support and the part itself is too wide on the 2 legs.

1

X_Carriage_MGN9H_Micron_Long.stl

BelgarionNL

#113 Renaming STLs/Z_Idlers/[a]_z_tensioner_x4.stl → STLs/Z_Idlers/[a]_z_tensioner_a_x2.stl Adding STLs/Z_Idlers/[a!]_z_tensioner_b_x2.stl (Mirrored) [image](https://github.com/PrintersForAnts/Micron/assets/321143/852280eb-207a-4c52-8dfb-c7f94c744314)

TheyCallMeZ

I believe it would print better if you flip it upside down

dderg

In the new skirt could an option for 50mm fans be provided as there is now enough room for them? (I guess 40mm would still be needed for people upgrading...

Walmtech

- There was one minor issue with the motor mount, where there is an unprintable overhang. Probably something a chamfer can already fix.   - In my setup (152mm...

skuep

3010 side bedfans

1

I had made mod to mount 3010 blower fans under bed on the side of the extrusion, it speed up heating time. This mod is allready on the Printables but...

LordKillZone