Micron

Micron copied to clipboard

CoookieTM

Measuring the latest CAD, here are the accurate values for QGL's gantry_corners: [quad_gantry_level] gantry_corners: -57.53, -9.51 # from Micron CAD Center-of-KGLM03 to bed. 177.53, 184.15 This differs ever so slightly...

leanghoun

Hi, What its the minimun layer height I can reach with this printer? I am interested in one printer for layer 0,05 mm or less.. I dont like DLP...

ManuelPeiro

And yet we don't have any places for them. Seems like providing a place for Wagos would be nice, especially for things going to the bed (AC/DC), and for 24v...

grmocg

Perhaps make them front-installed instead of from the rear.

grmocg

stacked electronics mount allows octopus to touch motors when placed upside down

1

Ideally that won't happen. Looks like the slots for the hinge are longer than they need to be for freely hinging the assembly. Thus, one possible solution is to make...

grmocg

I'm thinking to modify the rear skirt to provide for a cap to the inlet anyway. That could include two variants: one for DC beds, and one for AC beds...

grmocg

grmocg

Finn2708

Finn2708