Premraj Jadhav comments

Repositories
Issues
Comments

Results 3 comments of


                                            Premraj Jadhav

Solve the noise issue in PCB due to motors

@dhairyashah1 @gautam-dev-maker Updates: 1) I reproduced the issue using self balancing code to understand the error and the conditions required to reproduce the error. 2)Implemented the MPU and TB6612 system...

Solve the noise issue in PCB due to motors

As per the datasheet of TB6612FNG motor driver, VM as well as Vcc should have 2 bypass capacitors of 10uF and 0.1uF. But the motor driver module has only one...

Solve the noise issue in PCB due to motors

@dhairyashah1 @gautam-dev-maker On DRV8833 system when continuous PWM duty cycle of 90% is provided, each motor draws 100mA current on no obstruction and 700mA when fully obstructed. So far there...